Personnel and Material Decontamination Equipment

Personnel Dust-Removal Cabinet

An enclosed workwear dust-removal cabinet that pairs directional air jets with extraction to collect dust released from industrial garments.

Full-Height Extraction
Directed Garment Jets
Negative-Pressure Cabinet
External Filter Service

Request a Quote Browse Products

Product Introduction

The personnel dust-removal cabinet is designed for workers leaving dusty process areas rather than for standard cleanroom entry alone. Inside the compact enclosure, directional jets loosen powder from workwear while a broad extraction face draws the released material immediately toward staged collection filters. Maintaining negative pressure helps reduce dust escape when the cleaning cycle ends and the door is opened.

Key Features

A full-height extraction face collects dust across the worker's standing height.

Directional jets move contamination toward the extraction side rather than around the cabinet.

Negative pressure helps limit visible dust leakage at the door opening.

Staged collection filters can separate coarse and fine dust loads.

External filter cassettes keep routine service on the dirty side of the cabinet.

Customer Product Concerns

Heavily contaminated workwear needs capture at the moment it is disturbed so that the changing room does not become the dust collection area.

Cleaning jets remove dust but spread it through the cabinet.A broad extraction wall creates a directed airflow path from the jets to the filter bank.

Fine powder escapes when the door opens.The cabinet can maintain negative pressure and continue extraction briefly after the jet cycle.

Small filters clog quickly under industrial dust loading.Large staged collection filters separate coarse material before the finer downstream stage.

Filter change exposes staff to captured dust.Gasketed external cassettes provide access from the service side of the enclosure.

Typical Applications

Powder-processing exitsComposite workshopsMineral and ceramic productionIndustrial coating areas

Technical Parameters

Representative construction ranges for an industrial personnel dust-removal cabinet are listed below.

Core Material	Reinforced steel de-dusting cabinet with directional air jets, full-height extraction plenum and staged cartridge or panel filters
Panel Thickness	50 mm acoustic and dust-tight enclosure panels
Effective Width	900-1200 mm clear operator standing width
Maximum Length	Up to 1600 mm compact cabinet depth
Steel Facing Thickness	1.2-1.5 mm formed steel with abrasion-resistant internal liners
Core Density	60-80 kg/m³ acoustic mineral-fibre panel infill
Thermal Conductivity	0.035-0.042 W/(m·K) for the acoustic insulated enclosure
Surface Finish	Durable light-grey powder coating with stainless high-wear and extraction surfaces
Joint Type	Dust-tight flanged panel seams with gasketed external filter cassettes and sealed service doors
Customization	Available based on the intended application and operating environment.

Available Options

Cartridge or panel collection filtersCompressed-air or blower-driven jetsExtraction purge delayStainless internal wear liner

Planning a Personnel Dust-Removal Cabinet specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team