Complete enclosed personnel dust-removal cabinet in three-quarter view

人員 · 材料の汚染除去設備

パーソナル除塵キャビネット

An enclosed workwear dust-removal cabinet that pairs directional air jets with extraction to collect dust released from industrial garments.

Full-Height Extraction
Directed Garment Jets
Negative-Pressure Cabinet
External Filter Service

見積もりリクエスト製品案内

商品紹介

The personnel dust-removal cabinet is designed for workers leaving dusty process areas rather than for standard cleanroom entry alone. Inside the compact enclosure, directional jets loosen powder from workwear while a broad extraction face draws the released material immediately toward staged collection filters. Maintaining negative pressure helps reduce dust escape when the cleaning cycle ends and the door is opened.

主要な特徴

A full-height extraction face collects dust across the worker's standing height.

Directional jets move contamination toward the extraction side rather than around the cabinet.

Negative pressure helps limit visible dust leakage at the door opening.

Staged collection filters can separate coarse and fine dust loads.

External filter cassettes keep routine service on the dirty side of the cabinet.

お客様の製品に関する懸念事項

Heavily contaminated workwear needs capture at the moment it is disturbed so that the changing room does not become the dust collection area.

Cleaning jets remove dust but spread it through the cabinet.A broad extraction wall creates a directed airflow path from the jets to the filter bank.

Fine powder escapes when the door opens.The cabinet can maintain negative pressure and continue extraction briefly after the jet cycle.

Small filters clog quickly under industrial dust loading.Large staged collection filters separate coarse material before the finer downstream stage.

Filter change exposes staff to captured dust.Gasketed external cassettes provide access from the service side of the enclosure.

典型的な用途

Powder-processing exitsComposite workshopsMineral and ceramic productionIndustrial coating areas

技術的なパラメータ

Representative construction ranges for an industrial personnel dust-removal cabinet are listed below.

コア材料	Reinforced steel de-dusting cabinet with directional air jets, full-height extraction plenum and staged cartridge or panel filters
パネルの厚さ	50 mm acoustic and dust-tight enclosure panels
有効幅	900-1200 mm clear operator standing width
最大長さ	Up to 1600 mm compact cabinet depth
鋼鉄の厚さを直面する	1.2-1.5 mm formed steel with abrasion-resistant internal liners
コア密度	60-80 kg/m³ acoustic mineral-fibre panel infill
熱伝導率	0.035-0.042 W/(m·K) for the acoustic insulated enclosure
表面仕上げ	Durable light-grey powder coating with stainless high-wear and extraction surfaces
ジョイントタイプ	Dust-tight flanged panel seams with gasketed external filter cassettes and sealed service doors
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Cartridge or panel collection filtersCompressed-air or blower-driven jetsExtraction purge delayStainless internal wear liner

Planning a Personnel Dust-Removal Cabinet specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する