English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات إزالة التلوث للموظفين والمواد
مجلس الوزراء إزالة الغبار للأفراد
An enclosed workwear dust-removal cabinet that pairs directional air jets with extraction to collect dust released from industrial garments.
- استخراج الارتفاع الكامل
- Directed Garment Jets
- Negative-Pressure Cabinet
- External Filter Service
مقدمة المنتج
The personnel dust-removal cabinet is designed for workers leaving dusty process areas rather than for standard cleanroom entry alone. Inside the compact enclosure, directional jets loosen powder from workwear while a broad extraction face draws the released material immediately toward staged collection filters. Maintaining negative pressure helps reduce dust escape when the cleaning cycle ends and the door is opened.
الخصائص الرئيسية
Directional jets move contamination toward the extraction side rather than around the cabinet.
Negative pressure helps limit visible dust leakage at the door opening.
Staged collection filters can separate coarse and fine dust loads.
External filter cassettes keep routine service on the dirty side of the cabinet.
مخاوف المنتج للعملاء
Heavily contaminated workwear needs capture at the moment it is disturbed so that the changing room does not become the dust collection area.
Cleaning jets remove dust but spread it through the cabinet.A broad extraction wall creates a directed airflow path from the jets to the filter bank.
Fine powder escapes when the door opens.The cabinet can maintain negative pressure and continue extraction briefly after the jet cycle.
Small filters clog quickly under industrial dust loading.Large staged collection filters separate coarse material before the finer downstream stage.
Filter change exposes staff to captured dust.Gasketed external cassettes provide access from the service side of the enclosure.
تطبيقات نموذجية
Powder-processing exitsComposite workshopsMineral and ceramic productionIndustrial coating areas
المعلمات الفنية
Representative construction ranges for an industrial personnel dust-removal cabinet are listed below.
| المواد الأساسية | Reinforced steel de-dusting cabinet with directional air jets, full-height extraction plenum and staged cartridge or panel filters |
|---|---|
| سمك اللوحة | 50 mm acoustic and dust-tight enclosure panels |
| العرض الفعال | 900-1200 mm clear operator standing width |
| الحد الأقصى الطول | Up to 1600 mm compact cabinet depth |
| الصلب يواجه سمك | 1.2-1.5 mm formed steel with abrasion-resistant internal liners |
| الكثافة الأساسية | 60-80 kg/m³ acoustic mineral-fibre panel infill |
| الموصلية الحرارية | 0.035-0.042 W/(m·K) for the acoustic insulated enclosure |
| إنهاء السطح | Durable light-grey powder coating with stainless high-wear and extraction surfaces |
| نوع المشترك | Dust-tight flanged panel seams with gasketed external filter cassettes and sealed service doors |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Cartridge or panel collection filtersCompressed-air or blower-driven jetsExtraction purge delayStainless internal wear liner
Planning a Personnel Dust-Removal Cabinet specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
