English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Персонал и оборудование для дезактивации материалов
Персональный кабинет для удаления пыли
An enclosed workwear dust-removal cabinet that pairs directional air jets with extraction to collect dust released from industrial garments.
- Full-Height Extraction
- Directed Garment Jets
- Negative-Pressure Cabinet
- External Filter Service
Введение продукции
The personnel dust-removal cabinet is designed for workers leaving dusty process areas rather than for standard cleanroom entry alone. Inside the compact enclosure, directional jets loosen powder from workwear while a broad extraction face draws the released material immediately toward staged collection filters. Maintaining negative pressure helps reduce dust escape when the cleaning cycle ends and the door is opened.
Основные характеристики
Directional jets move contamination toward the extraction side rather than around the cabinet.
Negative pressure helps limit visible dust leakage at the door opening.
Staged collection filters can separate coarse and fine dust loads.
External filter cassettes keep routine service on the dirty side of the cabinet.
Обеспокоенность клиентов продуктами
Heavily contaminated workwear needs capture at the moment it is disturbed so that the changing room does not become the dust collection area.
Cleaning jets remove dust but spread it through the cabinet.A broad extraction wall creates a directed airflow path from the jets to the filter bank.
Fine powder escapes when the door opens.The cabinet can maintain negative pressure and continue extraction briefly after the jet cycle.
Small filters clog quickly under industrial dust loading.Large staged collection filters separate coarse material before the finer downstream stage.
Filter change exposes staff to captured dust.Gasketed external cassettes provide access from the service side of the enclosure.
Типичные приложения
Powder-processing exitsComposite workshopsMineral and ceramic productionIndustrial coating areas
Технические параметры
Representative construction ranges for an industrial personnel dust-removal cabinet are listed below.
| Основной материал | Reinforced steel de-dusting cabinet with directional air jets, full-height extraction plenum and staged cartridge or panel filters |
|---|---|
| Толщина панели | 50 mm acoustic and dust-tight enclosure panels |
| эффективная ширина | 900-1200 mm clear operator standing width |
| Максимальная длина | Up to 1600 mm compact cabinet depth |
| Толщина линий стали | 1.2-1.5 mm formed steel with abrasion-resistant internal liners |
| Плотность ядра | 60-80 kg/m³ acoustic mineral-fibre panel infill |
| Теплопроводимость | 0.035-0.042 W/(m·K) for the acoustic insulated enclosure |
| Поверхностная отделка | Durable light-grey powder coating with stainless high-wear and extraction surfaces |
| Объединенный тип | Dust-tight flanged panel seams with gasketed external filter cassettes and sealed service doors |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Cartridge or panel collection filtersCompressed-air or blower-driven jetsExtraction purge delayStainless internal wear liner
Planning a Personnel Dust-Removal Cabinet specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
