Complete enclosed personnel dust-removal cabinet in three-quarter view

인력 및 재료 오염 제거 장비

개인용 먼지 제거용 캐비닛

An enclosed workwear dust-removal cabinet that pairs directional air jets with extraction to collect dust released from industrial garments.

전체 높이 추출
Directed Garment Jets
Negative-Pressure Cabinet
External Filter Service

견적 요청 제품 찾아보기

상품 소개

The personnel dust-removal cabinet is designed for workers leaving dusty process areas rather than for standard cleanroom entry alone. Inside the compact enclosure, directional jets loosen powder from workwear while a broad extraction face draws the released material immediately toward staged collection filters. Maintaining negative pressure helps reduce dust escape when the cleaning cycle ends and the door is opened.

주요 기능

A full-height extraction face collects dust across the worker's standing height.

Directional jets move contamination toward the extraction side rather than around the cabinet.

Negative pressure helps limit visible dust leakage at the door opening.

Staged collection filters can separate coarse and fine dust loads.

External filter cassettes keep routine service on the dirty side of the cabinet.

고객 제품 관심사

Heavily contaminated workwear needs capture at the moment it is disturbed so that the changing room does not become the dust collection area.

Cleaning jets remove dust but spread it through the cabinet.A broad extraction wall creates a directed airflow path from the jets to the filter bank.

Fine powder escapes when the door opens.The cabinet can maintain negative pressure and continue extraction briefly after the jet cycle.

Small filters clog quickly under industrial dust loading.Large staged collection filters separate coarse material before the finer downstream stage.

Filter change exposes staff to captured dust.Gasketed external cassettes provide access from the service side of the enclosure.

일반적인 응용 프로그램

Powder-processing exitsComposite workshopsMineral and ceramic productionIndustrial coating areas

기술 매개변수

Representative construction ranges for an industrial personnel dust-removal cabinet are listed below.

핵심 재료	Reinforced steel de-dusting cabinet with directional air jets, full-height extraction plenum and staged cartridge or panel filters
패널 두께	50 mm acoustic and dust-tight enclosure panels
유효 폭	900-1200 mm clear operator standing width
최대 길이	Up to 1600 mm compact cabinet depth
강철 면면 두께	1.2-1.5 mm formed steel with abrasion-resistant internal liners
코어 밀도	60-80 kg/m³ acoustic mineral-fibre panel infill
열전도도 (Thermal Conductivity)	0.035-0.042 W/(m·K) for the acoustic insulated enclosure
표면 마무리	Durable light-grey powder coating with stainless high-wear and extraction surfaces
접합 유형	Dust-tight flanged panel seams with gasketed external filter cassettes and sealed service doors
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Cartridge or panel collection filtersCompressed-air or blower-driven jetsExtraction purge delayStainless internal wear liner

Planning a Personnel Dust-Removal Cabinet specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.