İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Personel ve Malzeme Dekontaminasyon Ekipmanları
personel toz-temizleme kabine
An enclosed workwear dust-removal cabinet that pairs directional air jets with extraction to collect dust released from industrial garments.
- Full-Height Extraction
- Directed Garment Jets
- Negative-Pressure Cabinet
- External Filter Service
Ürün tanıtımı
The personnel dust-removal cabinet is designed for workers leaving dusty process areas rather than for standard cleanroom entry alone. Inside the compact enclosure, directional jets loosen powder from workwear while a broad extraction face draws the released material immediately toward staged collection filters. Maintaining negative pressure helps reduce dust escape when the cleaning cycle ends and the door is opened.
Ana Özellikler
Directional jets move contamination toward the extraction side rather than around the cabinet.
Negative pressure helps limit visible dust leakage at the door opening.
Staged collection filters can separate coarse and fine dust loads.
External filter cassettes keep routine service on the dirty side of the cabinet.
Müşteri Ürün Sorunları
Heavily contaminated workwear needs capture at the moment it is disturbed so that the changing room does not become the dust collection area.
Cleaning jets remove dust but spread it through the cabinet.A broad extraction wall creates a directed airflow path from the jets to the filter bank.
Fine powder escapes when the door opens.The cabinet can maintain negative pressure and continue extraction briefly after the jet cycle.
Small filters clog quickly under industrial dust loading.Large staged collection filters separate coarse material before the finer downstream stage.
Filter change exposes staff to captured dust.Gasketed external cassettes provide access from the service side of the enclosure.
Tipik uygulamalar
Powder-processing exitsComposite workshopsMineral and ceramic productionIndustrial coating areas
Teknik parametreler
Representative construction ranges for an industrial personnel dust-removal cabinet are listed below.
| Temel malzemeler | Reinforced steel de-dusting cabinet with directional air jets, full-height extraction plenum and staged cartridge or panel filters |
|---|---|
| Panel kalınlığı | 50 mm acoustic and dust-tight enclosure panels |
| Effective Width (Etkili Genişlik) | 900-1200 mm clear operator standing width |
| Maksimum uzunluk | Up to 1600 mm compact cabinet depth |
| Çelik yüz yüze kalınlığı | 1.2-1.5 mm formed steel with abrasion-resistant internal liners |
| Core Density (Çekirdek Yoğunluğu) | 60-80 kg/m³ acoustic mineral-fibre panel infill |
| Termal İletkenlik | 0.035-0.042 W/(m·K) for the acoustic insulated enclosure |
| Yüzey bitirme | Durable light-grey powder coating with stainless high-wear and extraction surfaces |
| Ortak tip | Dust-tight flanged panel seams with gasketed external filter cassettes and sealed service doors |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Cartridge or panel collection filtersCompressed-air or blower-driven jetsExtraction purge delayStainless internal wear liner
Planning a Personnel Dust-Removal Cabinet specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
