Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Equipement de décontamination du personnel et du matériel
Cabinet d'élimination de la poussière par
An enclosed workwear dust-removal cabinet that pairs directional air jets with extraction to collect dust released from industrial garments.
- Full-Height Extraction
- Directed Garment Jets
- Negative-Pressure Cabinet
- External Filter Service
Introduction de produit
The personnel dust-removal cabinet is designed for workers leaving dusty process areas rather than for standard cleanroom entry alone. Inside the compact enclosure, directional jets loosen powder from workwear while a broad extraction face draws the released material immediately toward staged collection filters. Maintaining negative pressure helps reduce dust escape when the cleaning cycle ends and the door is opened.
Key Features
Directional jets move contamination toward the extraction side rather than around the cabinet.
Negative pressure helps limit visible dust leakage at the door opening.
Staged collection filters can separate coarse and fine dust loads.
External filter cassettes keep routine service on the dirty side of the cabinet.
Préoccupations du client produit
Heavily contaminated workwear needs capture at the moment it is disturbed so that the changing room does not become the dust collection area.
Cleaning jets remove dust but spread it through the cabinet.A broad extraction wall creates a directed airflow path from the jets to the filter bank.
Fine powder escapes when the door opens.The cabinet can maintain negative pressure and continue extraction briefly after the jet cycle.
Small filters clog quickly under industrial dust loading.Large staged collection filters separate coarse material before the finer downstream stage.
Filter change exposes staff to captured dust.Gasketed external cassettes provide access from the service side of the enclosure.
Les applications typiques
Powder-processing exitsComposite workshopsMineral and ceramic productionIndustrial coating areas
Paramètres techniques
Representative construction ranges for an industrial personnel dust-removal cabinet are listed below.
| Matériaux de base | Reinforced steel de-dusting cabinet with directional air jets, full-height extraction plenum and staged cartridge or panel filters |
|---|---|
| Panneau épaisseur | 50 mm acoustic and dust-tight enclosure panels |
| Largeur effective | 900-1200 mm clear operator standing width |
| Longueur maximale | Up to 1600 mm compact cabinet depth |
| Acier face épaisseur | 1.2-1.5 mm formed steel with abrasion-resistant internal liners |
| Densité Core | 60-80 kg/m³ acoustic mineral-fibre panel infill |
| Conductivité thermique | 0.035-0.042 W/(m·K) for the acoustic insulated enclosure |
| surface finie | Durable light-grey powder coating with stainless high-wear and extraction surfaces |
| Type joint | Dust-tight flanged panel seams with gasketed external filter cassettes and sealed service doors |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Cartridge or panel collection filtersCompressed-air or blower-driven jetsExtraction purge delayStainless internal wear liner
Planning a Personnel Dust-Removal Cabinet specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
