Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Equipamento de descontaminação de pessoal e materiais
Z Gabinete de remoção de poeira
An enclosed workwear dust-removal cabinet that pairs directional air jets with extraction to collect dust released from industrial garments.
- Full-Height Extraction
- Directed Garment Jets
- Negative-Pressure Cabinet
- External Filter Service
Introdução do produto
The personnel dust-removal cabinet is designed for workers leaving dusty process areas rather than for standard cleanroom entry alone. Inside the compact enclosure, directional jets loosen powder from workwear while a broad extraction face draws the released material immediately toward staged collection filters. Maintaining negative pressure helps reduce dust escape when the cleaning cycle ends and the door is opened.
Características-chave
Directional jets move contamination toward the extraction side rather than around the cabinet.
Negative pressure helps limit visible dust leakage at the door opening.
Staged collection filters can separate coarse and fine dust loads.
External filter cassettes keep routine service on the dirty side of the cabinet.
Preocupações do produto do cliente
Heavily contaminated workwear needs capture at the moment it is disturbed so that the changing room does not become the dust collection area.
Cleaning jets remove dust but spread it through the cabinet.A broad extraction wall creates a directed airflow path from the jets to the filter bank.
Fine powder escapes when the door opens.The cabinet can maintain negative pressure and continue extraction briefly after the jet cycle.
Small filters clog quickly under industrial dust loading.Large staged collection filters separate coarse material before the finer downstream stage.
Filter change exposes staff to captured dust.Gasketed external cassettes provide access from the service side of the enclosure.
Aplicações típicas
Powder-processing exitsComposite workshopsMineral and ceramic productionIndustrial coating areas
Parâmetros técnicos
Representative construction ranges for an industrial personnel dust-removal cabinet are listed below.
| Material principal | Reinforced steel de-dusting cabinet with directional air jets, full-height extraction plenum and staged cartridge or panel filters |
|---|---|
| Painel de espessura | 50 mm acoustic and dust-tight enclosure panels |
| Largura efetiva | 900-1200 mm clear operator standing width |
| Comprimento máximo | Up to 1600 mm compact cabinet depth |
| Aço enfrentando espessura | 1.2-1.5 mm formed steel with abrasion-resistant internal liners |
| Densidade Core | 60-80 kg/m³ acoustic mineral-fibre panel infill |
| Condutividade térmica | 0.035-0.042 W/(m·K) for the acoustic insulated enclosure |
| Superfície acabado | Durable light-grey powder coating with stainless high-wear and extraction surfaces |
| Tipo conjunto | Dust-tight flanged panel seams with gasketed external filter cassettes and sealed service doors |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Cartridge or panel collection filtersCompressed-air or blower-driven jetsExtraction purge delayStainless internal wear liner
Planning a Personnel Dust-Removal Cabinet specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
