Stainless steel cleanroom cable tray with complete covered straight section

Iluminação de sala limpa e equipamentos elétricos

Aço Inoxidável Cable Tray

A corrosion-resistant stainless cable-support system for wet, chemical-cleaning or hygienic cleanroom service routes.

SUS304 or SUS316L
Pickled and Passivated Finish
Deburred Hygienic Edges
Corrosion-Resistant Fittings

Introdução do produto

The stainless cable tray is formed from 304 or 316L sheet, wire or ladder components and then cleaned, pickled and passivated to restore a uniform protective surface. Smooth bends, stainless splice hardware and compatible supports prevent mixed-metal corrosion. Solid covers are available where the route is visible in the cleanroom, while ventilated or wire profiles can be used in service voids where heat dissipation is more important.

Características-chave

316L material provides improved resistance where chloride-bearing cleaners are present.

Pickling removes fabrication scale and passivation restores the protective surface film.

Deburred edges protect both cable jackets and cleaning gloves.

Stainless fasteners avoid dissimilar-metal staining at tray joints.

Matching covers and fittings maintain one material system through the route.

Preocupações do produto do cliente

Stainless tray performance depends on grade, fabrication finish and compatible joint hardware rather than material name alone.

Carbon-steel cut edges rust after repeated chemical cleaning.Stainless construction and post-fabrication passivation remove exposed ferrous coating breaks.

Mixed plated hardware produces rust streaks at joints.Matched stainless bolts, washers and supports maintain material compatibility.

Burrs cut cable jackets during installation.Rounded and mechanically deburred edges protect pulled conductors.

Open tray contents create a visible dust shelf.A fitted stainless cover closes exposed runs while remaining removable.

Aplicações típicas

Pharmaceutical washdown areasClean utility plantsFood and biotechnology facilitiesCorrosive laboratory services

Parâmetros técnicos

Typical configurable construction ranges for a stainless steel cable tray are listed below.

Material principal	SUS304 or SUS316L sheet, wire or ladder tray with matching stainless covers, fittings and fasteners
Painel de espessura	50-150 mm tray side-wall or ladder depth
Largura efetiva	100-900 mm usable tray width
Comprimento máximo	Up to 3000 mm per straight section
Aço enfrentando espessura	1.0-2.5 mm stainless tray and cover thickness
Densidade Core	Approximately 7900-8000 kg/m³ for austenitic stainless steel
Condutividade térmica	14-16 W/(m·K) for SUS304/SUS316L material
Superfície acabado	Pickled and passivated matte stainless, or fine-brushed sanitary finish
Tipo conjunto	Bolted stainless splice plates with matched bends, support brackets and removable cover
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

SUS304 or SUS316L gradeSolid, perforated, wire or ladder profileOpen or covered constructionCustom support spacing and fittings

Planning a Stainless Steel Cable Tray specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe