Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
FFU e equipamento de purificação de ar terminal
Unidade de filtro de ventilador padrão
A self-contained ceiling module that combines a controllable blower, final filter and perforated diffuser to deliver uniform particle-controlled supply air.
- Integrated Blower and Final Filter
- Uniform Downward Air Pattern
- Modular Ceiling-Grid Format
- Top-Side Service Access
Introdução do produto
The standard fan filter unit packages a backward-curved centrifugal blower, shallow pressure plenum, mini-pleat final filter and perforated diffuser in one ceiling-mounted housing. Air enters through the top prefilter, is distributed through the plenum and passes evenly across the full filter face before entering the clean zone. The drop-in perimeter is sized for common modular ceiling grids, while separate access to the fan and filter supports routine inspection without dismantling adjacent ceiling panels.
Características-chave
Internal baffles distribute air across the mini-pleat pack instead of concentrating velocity directly below the fan inlet.
The perforated downstream face protects the filter media and moderates the outlet air pattern.
A gasketed ceiling flange limits bypass between the FFU frame and the supporting grid.
Preocupações do produto do cliente
A standard FFU must provide repeatable clean air over a ceiling bay while remaining straightforward to install, balance and maintain.
A central fan jet creates high velocity in the middle and weak airflow near the filter corners.A formed pressure plenum and internal distribution baffle spread inlet air before it reaches the filter pack.
Air leaks around the module perimeter allow unfiltered ceiling-plenum air to enter the clean zone.A continuous closed-cell gasket seats against the ceiling grid and closes the perimeter bypass path.
Dust loading in a coarse prefilter shortens final-filter service life and raises fan power.A removable top intake prefilter captures larger debris before it reaches the high-efficiency media.
Different ceiling bays require inconsistent on-site adapters and leave uneven module spacing.Standardized square and rectangular footprints fit common cleanroom T-grid layouts with repeatable support points.
Aplicações típicas
Células limpas farmacêuticasElectronics assembly clean zonesMedical-device production suitesLaboratory preparation roomsModular hardwall and softwall cleanrooms
Parâmetros técnicos
Typical construction ranges for a modular standard fan filter unit are listed below.
| Material principal | Powder-coated galvanized-steel plenum, backward-curved centrifugal fan and micro-glass HEPA or ULPA filter pack |
|---|---|
| Painel de espessura | 300-380 mm overall module depth |
| Largura efetiva | 575-1170 mm nominal ceiling-grid width |
| Comprimento máximo | Up to 1170 mm standard module length |
| Aço enfrentando espessura | 0.8-1.0 mm formed galvanized-steel housing sheet |
| Densidade Core | Approximately 80-110 kg/m³ nominal compacted density of the mini-pleat micro-glass filter pack |
| Condutividade térmica | Approximately 0.035-0.045 W/(m·K) for the dry mini-pleat micro-glass pack used in the standard FFU |
| Superfície acabado | White epoxy-polyester powder coating with a white perforated downstream diffuser |
| Tipo conjunto | Drop-in T-grid perimeter flange with a continuous ceiling gasket and sealed filter-to-housing interface |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
575 × 575 mm or 575 × 1170 mm footprintH13 or H14 glass-fibre mini-pleat packTop-side fan access with optional clean-side filter releaseManual speed controller or group control interface
Planning a Standard Fan Filter Unit specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
