Three-quarter view of a static stainless-steel cleanroom pass box

Equipamento de descontaminação de pessoal e materiais

Caixa de passagem de sala limpa estática

A non-ventilated stainless transfer cabinet that separates two rooms through sealed, interlocked doors.

Non-Ventilated Transfer Chamber
Dual-Door Interlock
Smooth Lipless Interior
Compression Door Seals

Introdução do produto

The static pass box creates an enclosed material route through a cleanroom partition without its own fan or filter. Its double-wall stainless body conceals the interlock outside the payload space, and the flush internal chamber can be wiped without ledges. This simple configuration is suited to short transfers between compatible clean areas.

Características-chave

The concealed interlock is protected from impact by trays and cartons.

A lipless sill supports smooth, obstruction-free transfer.

Compression latches draw the door against a continuous perimeter gasket.

A glazed panel permits visual confirmation before access.

Mechanical or electrical one-door-at-a-time operation can be selected.

Preocupações do produto do cliente

A passive pass box must preserve the wall opening and prevent direct room-to-room exposure.

A direct hatch lets air and particles pass between rooms.Two sealed doors create an intermediate transfer volume.

Exposed hardware collects dirt and is damaged by loads.The interlock is isolated behind the double-wall chamber.

Raised sills snag cartons and retain debris.A flush lipless transfer surface removes the ledge.

Door gaskets seal unevenly around the perimeter.Compression latches apply repeatable closure force along the door edge.

Aplicações típicas

Pharmaceutical packaging transferMedical-device componentsElectronics cleanroomsLaboratory sample movement

Parâmetros técnicos

Typical construction ranges for a static wall-mounted pass box are listed below.

Material principal	Double-wall SUS 304 cabinet with polyurethane-insulated service void, glazed doors and silicone seals
Painel de espessura	50-80 mm double-wall cabinet construction
Largura efetiva	400-1000 mm clear transfer width
Comprimento máximo	Up to 1200 mm chamber depth
Aço enfrentando espessura	1.0-1.5 mm stainless-steel facing
Densidade Core	35-40 kg/m³ polyurethane service-void insulation
Condutividade térmica	0.022-0.028 W/(m·K) for polyurethane double-wall infill
Superfície acabado	Brushed SUS 304 with smooth flush interior seams and optional electropolished chamber
Tipo conjunto	Sealed folded or welded body with mechanically or electrically interlocked compression doors
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

Mechanical or electronic interlockSUS 304 or SUS 316L bodyOpaque or glazed doorsWall-thickness trim frame

Planning a Static Cleanroom Pass Box specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe