Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Sistemas de parede e teto para sala limpa
Painel de sala limpa de oxissulfato de magnésio
A dense inorganic-core cleanroom panel made with magnesium oxysulfate material between coated steel facings, offering a firm wall or ceiling surface for hygienic areas exposed to regular cleaning and controlled humidity.
- Dense Inorganic Core
- Moisture-Stable Composition
- Firm Panel Surface
- Tongue-and-Groove Assembly
Introdução do produto
The Magnesium Oxysulfate Cleanroom Panel uses a cured, chloride-free magnesium cement core between smooth coated-steel skins. Its dense inorganic structure produces a firm panel with good dimensional stability and resistance to ordinary cleanroom humidity. The outer facings provide the wipeable surface, while formed tongue-and-groove edges align adjacent modules and receive hygienic sealant. Closed perimeter profiles protect the core during transport and prevent cleaning liquid from reaching internal material at the panel ends. The construction is well suited to controlled areas that need a robust mineral panel without exposed fibres or a lightweight polymer-foam center.
Características-chave
A dense cured core gives walls a solid feel and resists local compression during normal handling.
Low water absorption helps the core maintain shape during routine humid service.
Smooth coated-steel facings prevent direct exposure of the inorganic core to cleaning agents.
Machined tongue-and-groove edges speed alignment across continuous wall and ceiling runs.
Preocupações do produto do cliente
Customers commonly compare moisture stability, panel weight, edge durability and surface cleaning performance.
Some magnesium boards absorb moisture and lose dimensional stability.Magnesium oxysulfate chemistry and sealed metal facings limit moisture uptake during normal service.
Dense inorganic panels can be chipped at exposed corners during transport.Protected perimeter profiles and rigid packaging shield vulnerable edges until installation.
Heavy modules are harder to position accurately at full room height.Controlled panel sizes and planned lifting points keep installation safe and joints aligned.
Rough mineral surfaces are unsuitable for frequent cleanroom wiping.Continuous coated-steel skins create the non-porous surface seen by the controlled room.
Aplicações típicas
Pharmaceutical preparation roomsFood and beverage clean processing areasMedical-device production spacesLaboratories and hospital support roomsHumid controlled-environment partitions
Parâmetros técnicos
Typical production specifications for the magnesium oxysulfate panel are shown below.
| Material principal | Magnesium oxysulfate inorganic composite |
|---|---|
| Painel de espessura | 50, 75, 100 or 120 mm |
| Largura efetiva | 950 or 1150 mm |
| Comprimento máximo | 6000 mm |
| Aço enfrentando espessura | 0.426–0.80 mm |
| Densidade Core | Approximately 220 kg/m³ |
| Condutividade térmica | Approximately 0.038 W/(m·K) |
| Superfície acabado | PE-, HDP- or PVDF-coated galvanized steel |
| Tipo conjunto | Machine-formed tongue-and-groove connection |
| Customização | Disponível com base na aplicação pretendida e ambiente operacional |
Opções disponíveis
Alternative steel coatingStainless steel facingWall or ceiling edge profileCustom module length and cut-outs
Planning a Magnesium Oxysulfate Cleanroom Panel specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
