Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Filtros de ar e filtragem química
Separador de filtros HEPA
A traditional full-depth HEPA cell that uses corrugated aluminum separators to hold broad microglass pleats open under demanding airflow.
- Corrugated Aluminum Separators
- Deep-Pleat Media Pack
- Rigid Full-Depth Cell
- High Dust Capacity
Introdução do produto
The separator HEPA filter forms water-resistant microglass media into deep pleats and places corrugated aluminum sheets between adjacent faces. Each separator creates a continuous airflow channel while adding stiffness across the full pack depth. The assembled pack is potted on all four sides into galvanized steel, stainless steel or anodized-aluminum cell sides, then protected by expanded-metal faceguards. Its robust construction is suited to built-up filter banks, containment housings and critical air handlers where the filter must tolerate handling, fan cycling and elevated final resistance.
Características-chave
A deeply potted pack-to-frame bond resists bypass and movement under pressure loading.
Rigid metal cell sides and faceguards protect both media faces during installation and removal.
The full-depth pack offers substantial dust storage for long-duty central HVAC service.
Preocupações do produto do cliente
Deep-pleat HEPA filters must maintain uniform channels and mechanical integrity as accumulated dust raises the pressure load.
Broad HEPA pleats collapse together and block large sections of media.Corrugated aluminum separators support each pleat face and preserve an open path through the complete depth.
A heavy media pack shifts inside the cell during transport or fan starts.Four-sided polyurethane potting anchors the pack to rigid metal cell sides.
Exposed microglass pleats are punctured during filter-bank servicing.Upstream and downstream expanded-metal faceguards keep hands and rack hardware away from the media.
A distorted full-size filter cannot compress evenly against the bank gasket.Reinforced cell sides and square corner joints retain a flat sealing plane.
Aplicações típicas
Critical HVAC final-filter banksPharmaceutical exhaust and supply systemsHospital isolation ventilationContainment and bag-in/bag-out housingsHigh-purity industrial air systems
Parâmetros técnicos
Typical construction ranges for a full-depth separator HEPA filter are listed below.
| Material principal | Water-resistant microglass HEPA media with corrugated aluminum separators |
|---|---|
| Painel de espessura | 150 or 292 mm nominal cell depth |
| Largura efetiva | 305-610 mm modular face width |
| Comprimento máximo | Up to 762 mm standard face length; larger cells use reinforced framing |
| Aço enfrentando espessura | 0.60-1.00 mm galvanized or stainless-steel faceguard and cell components |
| Densidade Core | Approximately 90-160 kg/m³ nominal assembled separator-pack density |
| Condutividade térmica | Approximately 0.032-0.039 W/(m·K) for dry deep-pleated borosilicate microglass media |
| Superfície acabado | White microglass media with natural aluminum separators and galvanized, stainless or anodized frame |
| Tipo conjunto | Deep-pleat separator pack fully potted into a rigid gasketed or gel-compatible cell |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
99.97%, 99.99% or 99.999% at 0.3 µmStandard- or high-capacity media packGalvanized steel, stainless steel or anodized-aluminum cellNeoprene gasket, fluid seal or high-temperature seal
Planning a Separator HEPA Filter specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
