Stainless steel cleanroom cable tray with complete covered straight section

Освещение и электрическое оборудование в чистых помещениях

Кабельная подкладка из нержавеющей стали

A corrosion-resistant stainless cable-support system for wet, chemical-cleaning or hygienic cleanroom service routes.

SUS304 or SUS316L
Pickled and Passivated Finish
Deburred Hygienic Edges
Corrosion-Resistant Fittings

Введение продукции

The stainless cable tray is formed from 304 or 316L sheet, wire or ladder components and then cleaned, pickled and passivated to restore a uniform protective surface. Smooth bends, stainless splice hardware and compatible supports prevent mixed-metal corrosion. Solid covers are available where the route is visible in the cleanroom, while ventilated or wire profiles can be used in service voids where heat dissipation is more important.

Основные характеристики

316L material provides improved resistance where chloride-bearing cleaners are present.

Pickling removes fabrication scale and passivation restores the protective surface film.

Deburred edges protect both cable jackets and cleaning gloves.

Stainless fasteners avoid dissimilar-metal staining at tray joints.

Matching covers and fittings maintain one material system through the route.

Обеспокоенность клиентов продуктами

Stainless tray performance depends on grade, fabrication finish and compatible joint hardware rather than material name alone.

Carbon-steel cut edges rust after repeated chemical cleaning.Stainless construction and post-fabrication passivation remove exposed ferrous coating breaks.

Mixed plated hardware produces rust streaks at joints.Matched stainless bolts, washers and supports maintain material compatibility.

Burrs cut cable jackets during installation.Rounded and mechanically deburred edges protect pulled conductors.

Open tray contents create a visible dust shelf.A fitted stainless cover closes exposed runs while remaining removable.

Типичные приложения

Pharmaceutical washdown areasClean utility plantsFood and biotechnology facilitiesCorrosive laboratory services

Технические параметры

Typical configurable construction ranges for a stainless steel cable tray are listed below.

Основной материал	SUS304 or SUS316L sheet, wire or ladder tray with matching stainless covers, fittings and fasteners
Толщина панели	50-150 mm tray side-wall or ladder depth
эффективная ширина	100-900 mm usable tray width
Максимальная длина	Up to 3000 mm per straight section
Толщина линий стали	1.0-2.5 mm stainless tray and cover thickness
Плотность ядра	Approximately 7900-8000 kg/m³ for austenitic stainless steel
Теплопроводимость	14-16 W/(m·K) for SUS304/SUS316L material
Поверхностная отделка	Pickled and passivated matte stainless, or fine-brushed sanitary finish
Объединенный тип	Bolted stainless splice plates with matched bends, support brackets and removable cover
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

SUS304 or SUS316L gradeSolid, perforated, wire or ladder profileOpen or covered constructionCustom support spacing and fittings

Planning a Stainless Steel Cable Tray specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой