Complete modular sampling room with separate personnel and material doors

Fluxo laminar e equipamentos de contenção

Sala Modular de Amostragem

A panel-built sampling suite that separates incoming containers, personnel access and controlled sampling work within a self-contained warehouse installation.

Panel-Built Sampling Suite
Separated Material Access
Integrated Airflow Zones
Expandable Modular Layout

Solicite um orçamento. Browse produtos

Introdução do produto

The modular sampling room encloses a complete workflow rather than a single open booth. Insulated cleanroom panels form the sampling space, while personnel and material doors can be arranged to avoid crossing routes. A filtered supply and return system maintains the selected room pressure and can include a local downflow station over the active sampling table. The panel system allows future extension or relocation without masonry construction.

Características-chave

Separate personnel and material doors organize the sampling route.

A local downflow zone can be integrated within the larger clean room.

Flush wall and ceiling joints create cleanable internal surfaces.

Service panels group electrical, airflow and monitoring connections outside the work area.

Modular wall bays permit controlled expansion as sampling capacity grows.

Preocupações do produto do cliente

A full sampling workflow needs orderly movement of people and containers, not just localized dust capture at one table.

Personnel and raw-material routes cross at one doorway.Dedicated doors separate gowning access from container entry.

Only the active sampling point requires strong local capture.A downflow work zone is integrated inside the larger controlled room.

Warehouse construction changes interrupt operations.Prefabricated panels install with limited wet building work.

Future capacity requires another sampling bay.Modular wall and ceiling sections can extend the suite layout.

Aplicações típicas

Incoming pharmaceutical materialsFood-ingredient samplingCosmetic raw-material checksControlled warehouse quality sampling

Parâmetros técnicos

Typical configurable construction ranges for a modular raw-material sampling room are listed below.

Material principal	Mineral-wool or polyurethane cleanroom panels with powder-coated steel faces and SUS304 internal work-zone liners
Painel de espessura	50-100 mm wall and ceiling panels
Largura efetiva	2500-6000 mm clear room width
Comprimento máximo	Up to 12000 mm modular room length
Aço enfrentando espessura	0.6-1.0 mm coated panel faces; 1.0-1.2 mm SUS304 local liners
Densidade Core	80-120 kg/m³ mineral wool or 38-45 kg/m³ polyurethane
Condutividade térmica	0.035-0.045 W/(m·K) mineral wool or 0.022-0.028 W/(m·K) polyurethane
Superfície acabado	Low-sheen white cleanroom coating with brushed stainless work-zone surfaces
Tipo conjunto	Flush sealed tongue-and-groove panels with coved internal bases and gasketed access doors
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

Personnel and material airlocksIntegrated downflow boothPass-through sample hatchPressure display and room controls

Planning a Modular Sampling Room specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe