Stainless steel cleanroom cable tray with complete covered straight section

클린룸 조명 및 전기 장비

스테인레스 스틸 케이블 트레이

A corrosion-resistant stainless cable-support system for wet, chemical-cleaning or hygienic cleanroom service routes.

SUS304 or SUS316L
Pickled and Passivated Finish
Deburred Hygienic Edges
Corrosion-Resistant Fittings

견적 요청 제품 찾아보기

상품 소개

The stainless cable tray is formed from 304 or 316L sheet, wire or ladder components and then cleaned, pickled and passivated to restore a uniform protective surface. Smooth bends, stainless splice hardware and compatible supports prevent mixed-metal corrosion. Solid covers are available where the route is visible in the cleanroom, while ventilated or wire profiles can be used in service voids where heat dissipation is more important.

주요 기능

316L material provides improved resistance where chloride-bearing cleaners are present.

Pickling removes fabrication scale and passivation restores the protective surface film.

Deburred edges protect both cable jackets and cleaning gloves.

Stainless fasteners avoid dissimilar-metal staining at tray joints.

Matching covers and fittings maintain one material system through the route.

고객 제품 관심사

Stainless tray performance depends on grade, fabrication finish and compatible joint hardware rather than material name alone.

Carbon-steel cut edges rust after repeated chemical cleaning.Stainless construction and post-fabrication passivation remove exposed ferrous coating breaks.

Mixed plated hardware produces rust streaks at joints.Matched stainless bolts, washers and supports maintain material compatibility.

Burrs cut cable jackets during installation.Rounded and mechanically deburred edges protect pulled conductors.

Open tray contents create a visible dust shelf.A fitted stainless cover closes exposed runs while remaining removable.

일반적인 응용 프로그램

Pharmaceutical washdown areasClean utility plantsFood and biotechnology facilitiesCorrosive laboratory services

기술 매개변수

Typical configurable construction ranges for a stainless steel cable tray are listed below.

핵심 재료	SUS304 or SUS316L sheet, wire or ladder tray with matching stainless covers, fittings and fasteners
패널 두께	50-150 mm tray side-wall or ladder depth
유효 폭	100-900 mm usable tray width
최대 길이	Up to 3000 mm per straight section
강철 면면 두께	1.0-2.5 mm stainless tray and cover thickness
코어 밀도	Approximately 7900-8000 kg/m³ for austenitic stainless steel
열전도도 (Thermal Conductivity)	14-16 W/(m·K) for SUS304/SUS316L material
표면 마무리	Pickled and passivated matte stainless, or fine-brushed sanitary finish
접합 유형	Bolted stainless splice plates with matched bends, support brackets and removable cover
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

SUS304 or SUS316L gradeSolid, perforated, wire or ladder profileOpen or covered constructionCustom support spacing and fittings

Planning a Stainless Steel Cable Tray specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.