Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Éclairage de salle blanche et équipements électriques
Cable Tray en acier inoxydable
A corrosion-resistant stainless cable-support system for wet, chemical-cleaning or hygienic cleanroom service routes.
- SUS304 or SUS316L
- Pickled and Passivated Finish
- Deburred Hygienic Edges
- Corrosion-Resistant Fittings
Introduction de produit
The stainless cable tray is formed from 304 or 316L sheet, wire or ladder components and then cleaned, pickled and passivated to restore a uniform protective surface. Smooth bends, stainless splice hardware and compatible supports prevent mixed-metal corrosion. Solid covers are available where the route is visible in the cleanroom, while ventilated or wire profiles can be used in service voids where heat dissipation is more important.
Key Features
Pickling removes fabrication scale and passivation restores the protective surface film.
Deburred edges protect both cable jackets and cleaning gloves.
Stainless fasteners avoid dissimilar-metal staining at tray joints.
Matching covers and fittings maintain one material system through the route.
Préoccupations du client produit
Stainless tray performance depends on grade, fabrication finish and compatible joint hardware rather than material name alone.
Carbon-steel cut edges rust after repeated chemical cleaning.Stainless construction and post-fabrication passivation remove exposed ferrous coating breaks.
Mixed plated hardware produces rust streaks at joints.Matched stainless bolts, washers and supports maintain material compatibility.
Burrs cut cable jackets during installation.Rounded and mechanically deburred edges protect pulled conductors.
Open tray contents create a visible dust shelf.A fitted stainless cover closes exposed runs while remaining removable.
Les applications typiques
Pharmaceutical washdown areasClean utility plantsFood and biotechnology facilitiesCorrosive laboratory services
Paramètres techniques
Typical configurable construction ranges for a stainless steel cable tray are listed below.
| Matériaux de base | SUS304 or SUS316L sheet, wire or ladder tray with matching stainless covers, fittings and fasteners |
|---|---|
| Panneau épaisseur | 50-150 mm tray side-wall or ladder depth |
| Largeur effective | 100-900 mm usable tray width |
| Longueur maximale | Up to 3000 mm per straight section |
| Acier face épaisseur | 1.0-2.5 mm stainless tray and cover thickness |
| Densité Core | Approximately 7900-8000 kg/m³ for austenitic stainless steel |
| Conductivité thermique | 14-16 W/(m·K) for SUS304/SUS316L material |
| surface finie | Pickled and passivated matte stainless, or fine-brushed sanitary finish |
| Type joint | Bolted stainless splice plates with matched bends, support brackets and removable cover |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
SUS304 or SUS316L gradeSolid, perforated, wire or ladder profileOpen or covered constructionCustom support spacing and fittings
Planning a Stainless Steel Cable Tray specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
