Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Sistemas de parede e teto para sala limpa
Painel Sandwich de Caminho de Mel em Sala Limpa
A lightweight steel-faced cleanroom panel with an expanded paper honeycomb core, designed for dry interior walls and ceilings where easy handling, good flatness and economical modular construction are primary requirements.
- Lightweight Honeycomb Core
- Flat Bonded Facings
- Easy Manual Handling
- Dry-Area Interior Use
Introdução do produto
Paper Honeycomb Cleanroom Panels bond coated-steel facings to an expanded cellular paper core inside a closed perimeter frame. The honeycomb geometry supports both skins at many closely spaced points, producing a flat panel with low overall weight. Installers can move larger modules with less lifting effort, which is useful in interior fit-outs and ceiling work. The core must remain dry and fully enclosed, so this economical construction is intended for controlled indoor areas without wash-down exposure or high concentrated loads.
Características-chave
Closely spaced honeycomb walls support smooth facings and limit surface waviness.
Low panel weight simplifies carrying, positioning and overhead installation.
Closed perimeter framing keeps paper edges isolated from the room environment.
The simple bonded structure offers an economical solution for non-load-bearing enclosures.
Preocupações do produto do cliente
Customers need clear limits for moisture exposure, fixture loads, core protection and long-term edge sealing.
Paper cores lose strength when moisture enters through an unsealed edge.Closed frames, intact facings and continuous joint sealant keep the cellular core dry.
Heavy accessories can crush a lightweight honeycomb where no insert is present.Fixtures are attached only at reinforced blocks or independent structural supports.
Repeated site cutting can expose paper cells and create debris.Openings are prepared in the factory and finished with sealed perimeter profiles.
A low-cost panel may be selected for a wash-down area beyond its service range.Paper honeycomb is reserved for dry interiors, while moisture-resistant cores are used elsewhere.
Aplicações típicas
Dry electronics assembly roomsGeneral cleanroom partitionsLight-duty suspended ceilingsPackaging and inspection roomsTemporary or reconfigurable controlled areas
Parâmetros técnicos
Typical specifications for dry-area paper honeycomb cleanroom panels are shown below.
| Material principal | Expanded kraft-paper honeycomb with closed perimeter frame |
|---|---|
| Painel de espessura | 50, 75 or 100 mm |
| Largura efetiva | 980 ou 1180 mm |
| Comprimento máximo | 6000 mm |
| Aço enfrentando espessura | 0,40 - 0,60 mm |
| Densidade Core | 32–48 kg/m³ |
| Condutividade térmica | 0.045–0.060 W/(m·K) |
| Superfície acabado | Smooth PE-coated galvanized steel for dry interior cleaning |
| Tipo conjunto | Framed tongue-and-groove or center-aluminum connection |
| Customização | Disponível com base na aplicação pretendida e ambiente operacional |
Opções disponíveis
Local fixture insertsCeiling-specific frameAlternative light-color coatingFactory-sealed cut-outs
Planning a Paper Honeycomb Cleanroom Sandwich Panel specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
