Stainless steel cleanroom cable tray with complete covered straight section

クリーンルーム照明 · 電気機器

ステンレス鋼のケーブルトレイ

A corrosion-resistant stainless cable-support system for wet, chemical-cleaning or hygienic cleanroom service routes.

SUS304 or SUS316L
Pickled and Passivated Finish
Deburred Hygienic Edges
Corrosion-Resistant Fittings

商品紹介

The stainless cable tray is formed from 304 or 316L sheet, wire or ladder components and then cleaned, pickled and passivated to restore a uniform protective surface. Smooth bends, stainless splice hardware and compatible supports prevent mixed-metal corrosion. Solid covers are available where the route is visible in the cleanroom, while ventilated or wire profiles can be used in service voids where heat dissipation is more important.

主要な特徴

316L material provides improved resistance where chloride-bearing cleaners are present.

Pickling removes fabrication scale and passivation restores the protective surface film.

Deburred edges protect both cable jackets and cleaning gloves.

Stainless fasteners avoid dissimilar-metal staining at tray joints.

Matching covers and fittings maintain one material system through the route.

お客様の製品に関する懸念事項

Stainless tray performance depends on grade, fabrication finish and compatible joint hardware rather than material name alone.

Carbon-steel cut edges rust after repeated chemical cleaning.Stainless construction and post-fabrication passivation remove exposed ferrous coating breaks.

Mixed plated hardware produces rust streaks at joints.Matched stainless bolts, washers and supports maintain material compatibility.

Burrs cut cable jackets during installation.Rounded and mechanically deburred edges protect pulled conductors.

Open tray contents create a visible dust shelf.A fitted stainless cover closes exposed runs while remaining removable.

典型的な用途

Pharmaceutical washdown areasClean utility plantsFood and biotechnology facilitiesCorrosive laboratory services

技術的なパラメータ

Typical configurable construction ranges for a stainless steel cable tray are listed below.

コア材料	SUS304 or SUS316L sheet, wire or ladder tray with matching stainless covers, fittings and fasteners
パネルの厚さ	50-150 mm tray side-wall or ladder depth
有効幅	100-900 mm usable tray width
最大長さ	Up to 3000 mm per straight section
鋼鉄の厚さを直面する	1.0-2.5 mm stainless tray and cover thickness
コア密度	Approximately 7900-8000 kg/m³ for austenitic stainless steel
熱伝導率	14-16 W/(m·K) for SUS304/SUS316L material
表面仕上げ	Pickled and passivated matte stainless, or fine-brushed sanitary finish
ジョイントタイプ	Bolted stainless splice plates with matched bends, support brackets and removable cover
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

SUS304 or SUS316L gradeSolid, perforated, wire or ladder profileOpen or covered constructionCustom support spacing and fittings

Planning a Stainless Steel Cable Tray specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する