İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Aydınlatma ve Elektrik Ekipmanları
Paslanmaz Çelik Kablo Tepsisi
A corrosion-resistant stainless cable-support system for wet, chemical-cleaning or hygienic cleanroom service routes.
- SUS304 or SUS316L
- Pickled and Passivated Finish
- Deburred Hygienic Edges
- Corrosion-Resistant Fittings
Ürün tanıtımı
The stainless cable tray is formed from 304 or 316L sheet, wire or ladder components and then cleaned, pickled and passivated to restore a uniform protective surface. Smooth bends, stainless splice hardware and compatible supports prevent mixed-metal corrosion. Solid covers are available where the route is visible in the cleanroom, while ventilated or wire profiles can be used in service voids where heat dissipation is more important.
Ana Özellikler
Pickling removes fabrication scale and passivation restores the protective surface film.
Deburred edges protect both cable jackets and cleaning gloves.
Stainless fasteners avoid dissimilar-metal staining at tray joints.
Matching covers and fittings maintain one material system through the route.
Müşteri Ürün Sorunları
Stainless tray performance depends on grade, fabrication finish and compatible joint hardware rather than material name alone.
Carbon-steel cut edges rust after repeated chemical cleaning.Stainless construction and post-fabrication passivation remove exposed ferrous coating breaks.
Mixed plated hardware produces rust streaks at joints.Matched stainless bolts, washers and supports maintain material compatibility.
Burrs cut cable jackets during installation.Rounded and mechanically deburred edges protect pulled conductors.
Open tray contents create a visible dust shelf.A fitted stainless cover closes exposed runs while remaining removable.
Tipik uygulamalar
Pharmaceutical washdown areasClean utility plantsFood and biotechnology facilitiesCorrosive laboratory services
Teknik parametreler
Typical configurable construction ranges for a stainless steel cable tray are listed below.
| Temel malzemeler | SUS304 or SUS316L sheet, wire or ladder tray with matching stainless covers, fittings and fasteners |
|---|---|
| Panel kalınlığı | 50-150 mm tray side-wall or ladder depth |
| Effective Width (Etkili Genişlik) | 100-900 mm usable tray width |
| Maksimum uzunluk | Up to 3000 mm per straight section |
| Çelik yüz yüze kalınlığı | 1.0-2.5 mm stainless tray and cover thickness |
| Core Density (Çekirdek Yoğunluğu) | Approximately 7900-8000 kg/m³ for austenitic stainless steel |
| Termal İletkenlik | 14-16 W/(m·K) for SUS304/SUS316L material |
| Yüzey bitirme | Pickled and passivated matte stainless, or fine-brushed sanitary finish |
| Ortak tip | Bolted stainless splice plates with matched bends, support brackets and removable cover |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
SUS304 or SUS316L gradeSolid, perforated, wire or ladder profileOpen or covered constructionCustom support spacing and fittings
Planning a Stainless Steel Cable Tray specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
