Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Filtros de ar e filtragem química
Filtro HEPA de alta temperatura
A heat-resistant HEPA filter assembled with glass-microfibre media, high-temperature separators and metal or ceramic framing for hot-air process zones.
- Heat-Resistant Construction
- Glass-Microfibre Media
- Ceramic or Stainless Frame
- High-Temperature Gasket
Introdução do produto
The high-temperature HEPA filter is designed for ovens, dryers and depyrogenation equipment that operate beyond the temperature limits of standard polyurethane-sealed filters. A glass-microfibre pack is formed with aluminium or glass-based separators and secured inside a stainless-steel or composite-ceramic frame using an inorganic or high-temperature silicone sealant. Braided-glass or silicone gaskets accommodate the selected service temperature. Thermal expansion clearances and reinforced faceguards protect the pack during controlled heat-up and cool-down cycles.
Características-chave
Stainless-steel or composite-ceramic framing remains dimensionally stable through repeated thermal cycles.
Braided-glass and high-temperature silicone gasket choices suit different oven flange arrangements.
Expansion-tolerant pack mounting reduces mechanical stress as the frame and media heat at different rates.
Preocupações do produto do cliente
Standard HEPA components can soften, outgas or lose their perimeter seal when exposed to prolonged high-temperature airflow.
Polyurethane sealant deteriorates during repeated oven cycles.An inorganic or temperature-rated silicone pack seal is selected for the intended continuous and peak temperature.
Different expansion rates distort the media pack as the filter heats.Controlled pack clearance and compliant high-temperature sealing absorb differential thermal movement.
A conventional rubber gasket hardens and leaks at elevated temperature.Braided-glass or high-temperature silicone gasketing maintains a suitable flange interface.
Rapid heating damages a filter even though its nominal temperature rating is adequate.The robust frame and reinforced pack are intended for defined ramp-up and cool-down procedures.
Aplicações típicas
Pharmaceutical depyrogenation tunnelsSterilizing and drying ovensFood-process hot-air systemsHigh-temperature coating linesLaboratory thermal chambers
Parâmetros técnicos
Representative construction ranges for high-temperature HEPA filters are listed below.
| Material principal | Heat-resistant glass-microfibre HEPA media with aluminium or glass-based separators |
|---|---|
| Painel de espessura | 84–292 mm overall filter depth |
| Largura efetiva | 305 - 610 mm Largura nominal da face |
| Comprimento máximo | Até 610 mm de altura nominal do rosto |
| Aço enfrentando espessura | 0.8–1.2 mm 304 stainless-steel frame or protective faceguard |
| Densidade Core | Approximately 45–70 kg/m³ equivalent heat-resistant media-pack density |
| Condutividade térmica | Approximately 0.040–0.055 W/(m·K) for the mineral-fibre filter pack |
| Superfície acabado | Clean brushed stainless steel or smooth composite-ceramic frame |
| Tipo conjunto | Braided-glass rope gasket or high-temperature silicone perimeter gasket |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Stainless-steel or composite-ceramic frameBraided-glass or silicone gasketSeparator-style or mini-pleat packContinuous-temperature configurations from 230 °C to 350 °C
Planning a High-Temperature HEPA Filter specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
