Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraum Beleuchtung und elektrische Ausrüstung
Edelstahl-Kabel - Tray
A corrosion-resistant stainless cable-support system for wet, chemical-cleaning or hygienic cleanroom service routes.
- SUS304 or SUS316L
- Pickled and Passivated Finish
- Deburred Hygienic Edges
- Corrosion-Resistant Fittings
Produkteinführung
The stainless cable tray is formed from 304 or 316L sheet, wire or ladder components and then cleaned, pickled and passivated to restore a uniform protective surface. Smooth bends, stainless splice hardware and compatible supports prevent mixed-metal corrosion. Solid covers are available where the route is visible in the cleanroom, while ventilated or wire profiles can be used in service voids where heat dissipation is more important.
Key Features
Pickling removes fabrication scale and passivation restores the protective surface film.
Deburred edges protect both cable jackets and cleaning gloves.
Stainless fasteners avoid dissimilar-metal staining at tray joints.
Matching covers and fittings maintain one material system through the route.
Kunden Produktbedenken
Stainless tray performance depends on grade, fabrication finish and compatible joint hardware rather than material name alone.
Carbon-steel cut edges rust after repeated chemical cleaning.Stainless construction and post-fabrication passivation remove exposed ferrous coating breaks.
Mixed plated hardware produces rust streaks at joints.Matched stainless bolts, washers and supports maintain material compatibility.
Burrs cut cable jackets during installation.Rounded and mechanically deburred edges protect pulled conductors.
Open tray contents create a visible dust shelf.A fitted stainless cover closes exposed runs while remaining removable.
Typische Anwendungen
Pharmaceutical washdown areasClean utility plantsFood and biotechnology facilitiesCorrosive laboratory services
Technische Parameter
Typical configurable construction ranges for a stainless steel cable tray are listed below.
| Core Material | SUS304 or SUS316L sheet, wire or ladder tray with matching stainless covers, fittings and fasteners |
|---|---|
| Panel Dicke | 50-150 mm tray side-wall or ladder depth |
| Effektive Breite | 100-900 mm usable tray width |
| Maximale Länge | Up to 3000 mm per straight section |
| Stahl facing Dicke | 1.0-2.5 mm stainless tray and cover thickness |
| Kerndichte | Approximately 7900-8000 kg/m³ for austenitic stainless steel |
| Thermische Leitfähigkeit | 14-16 W/(m·K) for SUS304/SUS316L material |
| Oberfläche Finish | Pickled and passivated matte stainless, or fine-brushed sanitary finish |
| Gemeinsamer Typ | Bolted stainless splice plates with matched bends, support brackets and removable cover |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
SUS304 or SUS316L gradeSolid, perforated, wire or ladder profileOpen or covered constructionCustom support spacing and fittings
Planning a Stainless Steel Cable Tray specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
