Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Equipamento de descontaminação de pessoal e materiais
Cargo Cleanroom Air Shower
A reinforced material-transfer air shower that removes loose surface dust from carts, palletised loads and production equipment before clean-area entry.
- Wide Cargo Passage
- Side and Top Cleaning
- Flush Wheeled Route
- Heavy-Duty Returns
Introdução do produto
The cargo air shower is sized around material handling rather than a stationary operator. Sidewall jets, and optional roof jets, direct filtered air across trolley frames, cartons and equipment surfaces. A level reinforced floor supports wheeled transfer, while guarded low-level returns and larger prefilters accommodate the heavier fibres and warehouse dust commonly carried by incoming materials.
Características-chave
Side and roof nozzle zones can clean vertical faces and upper load surfaces.
Lower impact protection guards returns from routine trolley contact.
Large-area prefilters are suited to coarse packaging fibres.
Large interlocked doors preserve the transfer boundary during the cleaning cycle.
Preocupações do produto do cliente
Material loads vary in height, shape and wheel loading, so the chamber must clean exposed surfaces without obstructing the transfer route.
Tall loads leave their upper surfaces outside sidewall airflow.Optional roof nozzles direct filtered air downward across load tops.
Raised thresholds impede pallet-jack movement.A flush reinforced floor maintains a smooth wheeled path.
Cart impacts damage exposed return grilles.Kick plates and protected inlet faces shield the low-level return sections.
Packaging debris clogs small personnel-air-shower filters.Expanded washable prefilter banks offer greater coarse-dust collection area.
Aplicações típicas
Pharmaceutical material transferFood ingredient cart entryElectronics equipment move-inPackaging component decontamination
Parâmetros técnicos
Typical structural ranges for a cart and equipment cargo air shower are given below.
| Material principal | Reinforced mineral-wool insulated steel enclosure with multi-side nozzle plenums, washable prefilters and H13 HEPA banks |
|---|---|
| Painel de espessura | 50-75 mm impact-reinforced wall and roof panels |
| Largura efetiva | 1500-2500 mm clear cargo passage width |
| Comprimento máximo | Up to 6000 mm modular cargo cleaning length |
| Aço enfrentando espessura | 1.2-1.5 mm steel facing with heavier stainless kick plates |
| Densidade Core | 80-120 kg/m³ mineral-wool enclosure core |
| Condutividade térmica | 0.036-0.045 W/(m·K) for the mineral-wool panel construction |
| Superfície acabado | Powder-coated upper panels with brushed stainless lower impact protection |
| Tipo conjunto | Bolted heavy-duty modular frame with flush floor joints and electrically interlocked cargo doors |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Swing, sliding or roll-up cargo doorsSide-plus-ceiling nozzle arrangementWheel guides and bumper railsPallet-jack or powered-cart clearances
Planning a Cargo Cleanroom Air Shower specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
