Three-quarter view of a complete single-person cleanroom air shower

Equipamento de descontaminação de pessoal e materiais

Single Person Cleanroom Air Shower (em inglês)

A compact, interlocked chamber that removes loose particles from one gowned operator with directional recirculated filtered air before clean-side access.

One-Person Footprint
Directional Garment Jets
Interlocked Door Sequence
Low-Level Particle Return

Solicite um orçamento. Browse produtos

Introdução do produto

This cleanroom air shower provides a controlled transition between a gowning room and a clean area. After entry, the door sequence holds the passage closed while sidewall nozzles direct filtered air across the operator; released lint is collected through lower return grilles before the air is recirculated. Its compact straight-through layout is intended for single-file personnel traffic where entrance space is limited.

Características-chave

A narrow internal passage gives one fully gowned operator working clearance without enlarging the entrance footprint.

Adjustable nozzle rows can be aimed at sleeves, torso and lower garments.

Lower return grilles draw released particles downward rather than allowing them to settle on footwear.

A timed controller coordinates the cleaning period and the door-release sequence.

Smooth internal panels allow routine wipe-down of the occupied chamber surfaces.

Preocupações do produto do cliente

A single-occupant entry needs repeatable garment cleaning without consuming valuable gowning-room space or creating confusing door operation.

Sleeves and trouser legs receive little cleaning when air is supplied at one height.Multi-level adjustable sidewall nozzles can cover upper and lower garment areas.

Premature clean-side opening can disturb the controlled boundary.The interlock keeps the exit secured until the programmed cycle has ended.

A large entrance unit crowds a compact gowning room.The blower, filtration path and returns are integrated within a slim self-contained enclosure.

Released particles can circulate around the operator.Low-wall return openings collect the particle-laden airflow close to the floor.

Aplicações típicas

Pharmaceutical gowning entrancesMedical-device assembly roomsElectronics cleanroom transitionsLaboratory controlled-area access

Parâmetros técnicos

Typical construction ranges for a compact one-person air shower are listed below.

Material principal	Polyurethane-insulated powder-coated steel enclosure with stainless nozzle plates, prefilter and H13 HEPA recirculation stage
Painel de espessura	50 mm insulated enclosure panels
Largura efetiva	800-900 mm clear internal passage width
Comprimento máximo	Up to 1200 mm chamber length
Aço enfrentando espessura	1.0-1.2 mm formed steel sheet
Densidade Core	38-45 kg/m³ closed-cell polyurethane insulation
Condutividade térmica	0.022-0.028 W/(m·K) for the insulated panel core
Superfície acabado	White epoxy-polyester powder coating with smooth sealed inner surfaces
Tipo conjunto	Gasketed panel seams with electromagnetically interlocked entrance and exit door frames
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

SUS 304 internal liner12-18 directional nozzlesProgrammable cleaning cycleLeft-hand or right-hand door swing

Planning a Single-Person Cleanroom Air Shower specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe