Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Iluminación de sala limpia y equipos eléctricos
Cable Tray de acero inoxidable
A corrosion-resistant stainless cable-support system for wet, chemical-cleaning or hygienic cleanroom service routes.
- SUS304 or SUS316L
- Pickled and Passivated Finish
- Deburred Hygienic Edges
- Corrosion-Resistant Fittings
Introducción del producto
The stainless cable tray is formed from 304 or 316L sheet, wire or ladder components and then cleaned, pickled and passivated to restore a uniform protective surface. Smooth bends, stainless splice hardware and compatible supports prevent mixed-metal corrosion. Solid covers are available where the route is visible in the cleanroom, while ventilated or wire profiles can be used in service voids where heat dissipation is more important.
Características clave
Pickling removes fabrication scale and passivation restores the protective surface film.
Deburred edges protect both cable jackets and cleaning gloves.
Stainless fasteners avoid dissimilar-metal staining at tray joints.
Matching covers and fittings maintain one material system through the route.
Preocupaciones del producto del cliente
Stainless tray performance depends on grade, fabrication finish and compatible joint hardware rather than material name alone.
Carbon-steel cut edges rust after repeated chemical cleaning.Stainless construction and post-fabrication passivation remove exposed ferrous coating breaks.
Mixed plated hardware produces rust streaks at joints.Matched stainless bolts, washers and supports maintain material compatibility.
Burrs cut cable jackets during installation.Rounded and mechanically deburred edges protect pulled conductors.
Open tray contents create a visible dust shelf.A fitted stainless cover closes exposed runs while remaining removable.
Aplicaciones típicas
Pharmaceutical washdown areasClean utility plantsFood and biotechnology facilitiesCorrosive laboratory services
Parámetros técnicos
Typical configurable construction ranges for a stainless steel cable tray are listed below.
| Materiales Core | SUS304 or SUS316L sheet, wire or ladder tray with matching stainless covers, fittings and fasteners |
|---|---|
| Panel de espesor | 50-150 mm tray side-wall or ladder depth |
| Ancho efectivo | 100-900 mm usable tray width |
| Longitud máxima | Up to 3000 mm per straight section |
| Acero frente a espesor | 1.0-2.5 mm stainless tray and cover thickness |
| Densidad Core | Approximately 7900-8000 kg/m³ for austenitic stainless steel |
| Conductividad térmica | 14-16 W/(m·K) for SUS304/SUS316L material |
| Superficie acabada | Pickled and passivated matte stainless, or fine-brushed sanitary finish |
| Tipo conjunto | Bolted stainless splice plates with matched bends, support brackets and removable cover |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
SUS304 or SUS316L gradeSolid, perforated, wire or ladder profileOpen or covered constructionCustom support spacing and fittings
Planning a Stainless Steel Cable Tray specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
