Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Equipamento de sala limpa específico da indústria
Autoclave pass-through farmacêutica
A double-door cleanroom steam sterilizer that transfers processed loads between segregated areas through an interlocked 316L stainless chamber.
- Interlocked Double Doors
- 316L Pressure Chamber
- Clean-Steam Sterilization
- Trolley Loading System
Introdução do produto
The pharmaceutical pass-through autoclave mounts between segregated rooms so loads enter from one side and exit from the other only after the completed sterilization cycle. A jacketed 316L stainless chamber, vacuum-assisted air removal and clean-steam distribution support porous, wrapped or component loads. Door interlocks, loading rails and dedicated trolleys maintain separation and safe material movement across the wall boundary.
Características-chave
Jacketed 316L chamber and vacuum system support controlled steam penetration and drying.
Anti-tip rails and dedicated trolleys guide heavy loads through the chamber.
PLC control records cycle temperature, pressure and phase status for operational review.
Preocupações do produto do cliente
Materials must cross room boundaries without bypassing sterilization or permitting both sides of the pressure chamber to open together.
Manual transfer can reconnect dirty and clean sides.Door interlocks release the discharge side only after the configured cycle completes.
Trapped air prevents uniform steam contact in porous loads.Vacuum-assisted air removal and controlled steam pulses improve chamber penetration.
Heavy trolleys are difficult to align with the chamber.Fixed anti-tip loading rails provide a repeatable guided path through the sterilizer.
Cycle deviations are hard to investigate without recorded data.PLC monitoring records pressure, temperature and phase progression for each load.
Aplicações típicas
Pharmaceutical component sterilizationCleanroom tool and garment loadsBiotechnology production materialsHigh-containment pass-through processing
Parâmetros técnicos
Typical construction values for a pharmaceutical pass-through steam autoclave are listed below.
| Material principal | 316L stainless steel pressure chamber with stainless loading rails and silicone door seals |
|---|---|
| Painel de espessura | 60-120 mm insulated external panels |
| Largura efetiva | 600-1500 mm clear chamber width |
| Comprimento máximo | Up to 3000 mm usable chamber length |
| Aço enfrentando espessura | 1.2-2.0 mm external stainless cladding |
| Densidade Core | 80-140 kg/m³ for high-temperature insulated cladding |
| Condutividade térmica | 0.040-0.060 W/(m·K) for insulated cladding |
| Superfície acabado | Polished 316L chamber with satin stainless exterior panels |
| Tipo conjunto | Welded jacketed pressure chamber with interlocked gasketed doors, sanitary steam piping and guided trolley rails |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Rectangular or cylindrical chamberHinged or powered sliding doorsClean-steam generator and vacuum dryingEffluent retention and filtered venting
Planning a Pharmaceutical Pass-Through Autoclave specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
