Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Equipement de salle blanche spécifique à l'industrie
Autoclave pharmaceutique Pass-Through par
A double-door cleanroom steam sterilizer that transfers processed loads between segregated areas through an interlocked 316L stainless chamber.
- Interlocked Double Doors
- 316L Pressure Chamber
- Clean-Steam Sterilization
- Trolley Loading System
Introduction de produit
The pharmaceutical pass-through autoclave mounts between segregated rooms so loads enter from one side and exit from the other only after the completed sterilization cycle. A jacketed 316L stainless chamber, vacuum-assisted air removal and clean-steam distribution support porous, wrapped or component loads. Door interlocks, loading rails and dedicated trolleys maintain separation and safe material movement across the wall boundary.
Key Features
Jacketed 316L chamber and vacuum system support controlled steam penetration and drying.
Anti-tip rails and dedicated trolleys guide heavy loads through the chamber.
PLC control records cycle temperature, pressure and phase status for operational review.
Préoccupations du client produit
Materials must cross room boundaries without bypassing sterilization or permitting both sides of the pressure chamber to open together.
Manual transfer can reconnect dirty and clean sides.Door interlocks release the discharge side only after the configured cycle completes.
Trapped air prevents uniform steam contact in porous loads.Vacuum-assisted air removal and controlled steam pulses improve chamber penetration.
Heavy trolleys are difficult to align with the chamber.Fixed anti-tip loading rails provide a repeatable guided path through the sterilizer.
Cycle deviations are hard to investigate without recorded data.PLC monitoring records pressure, temperature and phase progression for each load.
Les applications typiques
Pharmaceutical component sterilizationCleanroom tool and garment loadsBiotechnology production materialsHigh-containment pass-through processing
Paramètres techniques
Typical construction values for a pharmaceutical pass-through steam autoclave are listed below.
| Matériaux de base | 316L stainless steel pressure chamber with stainless loading rails and silicone door seals |
|---|---|
| Panneau épaisseur | 60-120 mm insulated external panels |
| Largeur effective | 600-1500 mm clear chamber width |
| Longueur maximale | Up to 3000 mm usable chamber length |
| Acier face épaisseur | 1.2-2.0 mm external stainless cladding |
| Densité Core | 80-140 kg/m³ for high-temperature insulated cladding |
| Conductivité thermique | 0.040-0.060 W/(m·K) for insulated cladding |
| surface finie | Polished 316L chamber with satin stainless exterior panels |
| Type joint | Welded jacketed pressure chamber with interlocked gasketed doors, sanitary steam piping and guided trolley rails |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Rectangular or cylindrical chamberHinged or powered sliding doorsClean-steam generator and vacuum dryingEffluent retention and filtered venting
Planning a Pharmaceutical Pass-Through Autoclave specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
