Pharmaceutical pass-through autoclave complete three-quarter view with open door and trolley

Peralatan Bilik Bersih Spesifik Industri

Farmasi Pass-Through Autoclave

A double-door cleanroom steam sterilizer that transfers processed loads between segregated areas through an interlocked 316L stainless chamber.

Interlocked Double Doors
316L Pressure Chamber
Clean-Steam Sterilization
Trolley Loading System

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The pharmaceutical pass-through autoclave mounts between segregated rooms so loads enter from one side and exit from the other only after the completed sterilization cycle. A jacketed 316L stainless chamber, vacuum-assisted air removal and clean-steam distribution support porous, wrapped or component loads. Door interlocks, loading rails and dedicated trolleys maintain separation and safe material movement across the wall boundary.

Ciri-ciri Utama

Opposing interlocked doors prevent an unsterilized load path through the cleanroom boundary.

Jacketed 316L chamber and vacuum system support controlled steam penetration and drying.

Anti-tip rails and dedicated trolleys guide heavy loads through the chamber.

PLC control records cycle temperature, pressure and phase status for operational review.

Kebimbangan Produk Pelanggan

Materials must cross room boundaries without bypassing sterilization or permitting both sides of the pressure chamber to open together.

Manual transfer can reconnect dirty and clean sides.Door interlocks release the discharge side only after the configured cycle completes.

Trapped air prevents uniform steam contact in porous loads.Vacuum-assisted air removal and controlled steam pulses improve chamber penetration.

Heavy trolleys are difficult to align with the chamber.Fixed anti-tip loading rails provide a repeatable guided path through the sterilizer.

Cycle deviations are hard to investigate without recorded data.PLC monitoring records pressure, temperature and phase progression for each load.

Permohonan yang biasa

Pharmaceutical component sterilizationCleanroom tool and garment loadsBiotechnology production materialsHigh-containment pass-through processing

Parameter teknikal

Typical construction values for a pharmaceutical pass-through steam autoclave are listed below.

Bahan Teras	316L stainless steel pressure chamber with stainless loading rails and silicone door seals
Ketebalan Panel	60-120 mm insulated external panels
Lebar berkesan	600-1500 mm clear chamber width
Panjang maksimum	Up to 3000 mm usable chamber length
Keluli Menghadapi Ketebalan	1.2-2.0 mm external stainless cladding
Ketumpatan teras	80-140 kg/m³ for high-temperature insulated cladding
Kekonduksian Terma	0.040-0.060 W/(m·K) for insulated cladding
Kemasan permukaan	Polished 316L chamber with satin stainless exterior panels
Jenis Bersatu	Welded jacketed pressure chamber with interlocked gasketed doors, sanitary steam piping and guided trolley rails
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Rectangular or cylindrical chamberHinged or powered sliding doorsClean-steam generator and vacuum dryingEffluent retention and filtered venting

Planning a Pharmaceutical Pass-Through Autoclave specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami