Pharmaceutical pass-through autoclave complete three-quarter view with open door and trolley

산업별 클린룸 장비

Pharmaceutical Pass - Through 오토클레이브

A double-door cleanroom steam sterilizer that transfers processed loads between segregated areas through an interlocked 316L stainless chamber.

Interlocked Double Doors
316L Pressure Chamber
Clean-Steam Sterilization
Trolley Loading System

견적 요청 제품 찾아보기

상품 소개

The pharmaceutical pass-through autoclave mounts between segregated rooms so loads enter from one side and exit from the other only after the completed sterilization cycle. A jacketed 316L stainless chamber, vacuum-assisted air removal and clean-steam distribution support porous, wrapped or component loads. Door interlocks, loading rails and dedicated trolleys maintain separation and safe material movement across the wall boundary.

주요 기능

Opposing interlocked doors prevent an unsterilized load path through the cleanroom boundary.

Jacketed 316L chamber and vacuum system support controlled steam penetration and drying.

Anti-tip rails and dedicated trolleys guide heavy loads through the chamber.

PLC control records cycle temperature, pressure and phase status for operational review.

고객 제품 관심사

Materials must cross room boundaries without bypassing sterilization or permitting both sides of the pressure chamber to open together.

Manual transfer can reconnect dirty and clean sides.Door interlocks release the discharge side only after the configured cycle completes.

Trapped air prevents uniform steam contact in porous loads.Vacuum-assisted air removal and controlled steam pulses improve chamber penetration.

Heavy trolleys are difficult to align with the chamber.Fixed anti-tip loading rails provide a repeatable guided path through the sterilizer.

Cycle deviations are hard to investigate without recorded data.PLC monitoring records pressure, temperature and phase progression for each load.

일반적인 응용 프로그램

Pharmaceutical component sterilizationCleanroom tool and garment loadsBiotechnology production materialsHigh-containment pass-through processing

기술 매개변수

Typical construction values for a pharmaceutical pass-through steam autoclave are listed below.

핵심 재료	316L stainless steel pressure chamber with stainless loading rails and silicone door seals
패널 두께	60-120 mm insulated external panels
유효 폭	600-1500 mm clear chamber width
최대 길이	Up to 3000 mm usable chamber length
강철 면면 두께	1.2-2.0 mm external stainless cladding
코어 밀도	80-140 kg/m³ for high-temperature insulated cladding
열전도도 (Thermal Conductivity)	0.040-0.060 W/(m·K) for insulated cladding
표면 마무리	Polished 316L chamber with satin stainless exterior panels
접합 유형	Welded jacketed pressure chamber with interlocked gasketed doors, sanitary steam piping and guided trolley rails
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Rectangular or cylindrical chamberHinged or powered sliding doorsClean-steam generator and vacuum dryingEffluent retention and filtered venting

Planning a Pharmaceutical Pass-Through Autoclave specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.