Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de sala limpia específicos de la industria
Autoclave de paso a través
A double-door cleanroom steam sterilizer that transfers processed loads between segregated areas through an interlocked 316L stainless chamber.
- Interlocked Double Doors
- 316L Pressure Chamber
- Clean-Steam Sterilization
- Trolley Loading System
Introducción del producto
The pharmaceutical pass-through autoclave mounts between segregated rooms so loads enter from one side and exit from the other only after the completed sterilization cycle. A jacketed 316L stainless chamber, vacuum-assisted air removal and clean-steam distribution support porous, wrapped or component loads. Door interlocks, loading rails and dedicated trolleys maintain separation and safe material movement across the wall boundary.
Características clave
Jacketed 316L chamber and vacuum system support controlled steam penetration and drying.
Anti-tip rails and dedicated trolleys guide heavy loads through the chamber.
PLC control records cycle temperature, pressure and phase status for operational review.
Preocupaciones del producto del cliente
Materials must cross room boundaries without bypassing sterilization or permitting both sides of the pressure chamber to open together.
Manual transfer can reconnect dirty and clean sides.Door interlocks release the discharge side only after the configured cycle completes.
Trapped air prevents uniform steam contact in porous loads.Vacuum-assisted air removal and controlled steam pulses improve chamber penetration.
Heavy trolleys are difficult to align with the chamber.Fixed anti-tip loading rails provide a repeatable guided path through the sterilizer.
Cycle deviations are hard to investigate without recorded data.PLC monitoring records pressure, temperature and phase progression for each load.
Aplicaciones típicas
Pharmaceutical component sterilizationCleanroom tool and garment loadsBiotechnology production materialsHigh-containment pass-through processing
Parámetros técnicos
Typical construction values for a pharmaceutical pass-through steam autoclave are listed below.
| Materiales Core | 316L stainless steel pressure chamber with stainless loading rails and silicone door seals |
|---|---|
| Panel de espesor | 60-120 mm insulated external panels |
| Ancho efectivo | 600-1500 mm clear chamber width |
| Longitud máxima | Up to 3000 mm usable chamber length |
| Acero frente a espesor | 1.2-2.0 mm external stainless cladding |
| Densidad Core | 80-140 kg/m³ for high-temperature insulated cladding |
| Conductividad térmica | 0.040-0.060 W/(m·K) for insulated cladding |
| Superficie acabada | Polished 316L chamber with satin stainless exterior panels |
| Tipo conjunto | Welded jacketed pressure chamber with interlocked gasketed doors, sanitary steam piping and guided trolley rails |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Rectangular or cylindrical chamberHinged or powered sliding doorsClean-steam generator and vacuum dryingEffluent retention and filtered venting
Planning a Pharmaceutical Pass-Through Autoclave specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
