İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Endüstriye Özel Temiz Oda Ekipmanları
Farmasötik Pass-Through Autoclave
A double-door cleanroom steam sterilizer that transfers processed loads between segregated areas through an interlocked 316L stainless chamber.
- Interlocked Double Doors
- 316L Pressure Chamber
- Clean-Steam Sterilization
- Trolley Loading System
Ürün tanıtımı
The pharmaceutical pass-through autoclave mounts between segregated rooms so loads enter from one side and exit from the other only after the completed sterilization cycle. A jacketed 316L stainless chamber, vacuum-assisted air removal and clean-steam distribution support porous, wrapped or component loads. Door interlocks, loading rails and dedicated trolleys maintain separation and safe material movement across the wall boundary.
Ana Özellikler
Jacketed 316L chamber and vacuum system support controlled steam penetration and drying.
Anti-tip rails and dedicated trolleys guide heavy loads through the chamber.
PLC control records cycle temperature, pressure and phase status for operational review.
Müşteri Ürün Sorunları
Materials must cross room boundaries without bypassing sterilization or permitting both sides of the pressure chamber to open together.
Manual transfer can reconnect dirty and clean sides.Door interlocks release the discharge side only after the configured cycle completes.
Trapped air prevents uniform steam contact in porous loads.Vacuum-assisted air removal and controlled steam pulses improve chamber penetration.
Heavy trolleys are difficult to align with the chamber.Fixed anti-tip loading rails provide a repeatable guided path through the sterilizer.
Cycle deviations are hard to investigate without recorded data.PLC monitoring records pressure, temperature and phase progression for each load.
Tipik uygulamalar
Pharmaceutical component sterilizationCleanroom tool and garment loadsBiotechnology production materialsHigh-containment pass-through processing
Teknik parametreler
Typical construction values for a pharmaceutical pass-through steam autoclave are listed below.
| Temel malzemeler | 316L stainless steel pressure chamber with stainless loading rails and silicone door seals |
|---|---|
| Panel kalınlığı | 60-120 mm insulated external panels |
| Effective Width (Etkili Genişlik) | 600-1500 mm clear chamber width |
| Maksimum uzunluk | Up to 3000 mm usable chamber length |
| Çelik yüz yüze kalınlığı | 1.2-2.0 mm external stainless cladding |
| Core Density (Çekirdek Yoğunluğu) | 80-140 kg/m³ for high-temperature insulated cladding |
| Termal İletkenlik | 0.040-0.060 W/(m·K) for insulated cladding |
| Yüzey bitirme | Polished 316L chamber with satin stainless exterior panels |
| Ortak tip | Welded jacketed pressure chamber with interlocked gasketed doors, sanitary steam piping and guided trolley rails |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Rectangular or cylindrical chamberHinged or powered sliding doorsClean-steam generator and vacuum dryingEffluent retention and filtered venting
Planning a Pharmaceutical Pass-Through Autoclave specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
