Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Equipamento de manuseio de ar e HVAC para sala limpa
Z Modular Air-Cooled Scroll Chiller
An expandable chilled-water system built from parallel air-cooled scroll modules that stage together as cleanroom cooling demand grows.
- Expandable Parallel Modules
- Independent Refrigerant Circuits
- Fine Capacity Staging
- Serviceable Without Total Shutdown
Introdução do produto
The modular air-cooled scroll chiller divides plant capacity among compact factory-built modules connected to common chilled-water headers and a coordinating controller. Each module contains scroll compressors, a liquid heat exchanger, condenser coil and fans. Additional modules increase capacity without replacing the original plant, while multiple compressors provide small operating steps. Isolation valves and independent circuits allow one module to be serviced while the remaining modules continue supplying partial cooling.
Características-chave
Multiple scroll compressors provide small capacity steps and useful low-load turndown.
Independent refrigerant circuits confine a service event to one module rather than the complete plant.
A common controller rotates lead duty and stages modules against leaving-water temperature.
Preocupações do produto do cliente
A growing facility needs enough initial cooling without buying an oversized single chiller that will cycle inefficiently for years.
Initial cleanroom load is small but future production phases require more capacity.Additional matched modules connect to the common headers and controller as demand grows.
One chiller failure removes all process cooling.Independent modules continue operating at the remaining available capacity.
Unequal water flow causes some modules to trip while others carry little load.Reverse-return headers, balancing valves and coordinated pump control distribute flow.
Modules accumulate unequal compressor hours.Lead-lag rotation balances starts and run time across the staged plant.
Aplicações típicas
Phased cleanroom expansionsSmall pharmaceutical plantsLaboratory campusesMedical-device manufacturingProcess cooling with staged demand
Parâmetros técnicos
Representative single-module construction and chilled-water insulation data are listed below.
| Material principal | Rigid polyisocyanurate foam around the brazed-plate evaporator and chilled-water headers |
|---|---|
| Painel de espessura | 1.0–1.5 mm removable module enclosure panels |
| Largura efetiva | 800–1500 mm nominal width per module |
| Comprimento máximo | 1900–2550 mm per factory module |
| Aço enfrentando espessura | 1.0–2.0 mm galvanized module frame and service panels |
| Densidade Core | 32 kg/m³ nominal rigid polyisocyanurate insulation |
| Condutividade térmica | 0.023 W/(m·K) at 10°C for the polyisocyanurate insulation |
| Superfície acabado | Outdoor powder-coated galvanized steel with aluminum-copper or microchannel condenser |
| Tipo conjunto | Bolted modular bases with common grooved water headers and independent isolation valves |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Two to sixteen coordinated modules with common headersIntegrated primary pump and buffer tankLow-ambient and low-noise packagesHeat-pump or cooling-only module configuration
Planning a Modular Air-Cooled Scroll Chiller specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
