Bank of modular air-cooled scroll chiller modules

클린룸 HVAC 및 공기 처리 장비

모듈식 공기 냉각 스크롤 냉각기

An expandable chilled-water system built from parallel air-cooled scroll modules that stage together as cleanroom cooling demand grows.

Expandable Parallel Modules
Independent Refrigerant Circuits
Fine Capacity Staging
Serviceable Without Total Shutdown

견적 요청 제품 찾아보기

상품 소개

The modular air-cooled scroll chiller divides plant capacity among compact factory-built modules connected to common chilled-water headers and a coordinating controller. Each module contains scroll compressors, a liquid heat exchanger, condenser coil and fans. Additional modules increase capacity without replacing the original plant, while multiple compressors provide small operating steps. Isolation valves and independent circuits allow one module to be serviced while the remaining modules continue supplying partial cooling.

주요 기능

Parallel modules allow cooling capacity to expand in planned increments as production demand increases.

Multiple scroll compressors provide small capacity steps and useful low-load turndown.

Independent refrigerant circuits confine a service event to one module rather than the complete plant.

A common controller rotates lead duty and stages modules against leaving-water temperature.

고객 제품 관심사

A growing facility needs enough initial cooling without buying an oversized single chiller that will cycle inefficiently for years.

Initial cleanroom load is small but future production phases require more capacity.Additional matched modules connect to the common headers and controller as demand grows.

One chiller failure removes all process cooling.Independent modules continue operating at the remaining available capacity.

Unequal water flow causes some modules to trip while others carry little load.Reverse-return headers, balancing valves and coordinated pump control distribute flow.

Modules accumulate unequal compressor hours.Lead-lag rotation balances starts and run time across the staged plant.

일반적인 응용 프로그램

Phased cleanroom expansionsSmall pharmaceutical plantsLaboratory campuses의료기기 제조Process cooling with staged demand

기술 매개변수

Representative single-module construction and chilled-water insulation data are listed below.

핵심 재료	Rigid polyisocyanurate foam around the brazed-plate evaporator and chilled-water headers
패널 두께	1.0–1.5 mm removable module enclosure panels
유효 폭	800–1500 mm nominal width per module
최대 길이	1900–2550 mm per factory module
강철 면면 두께	1.0–2.0 mm galvanized module frame and service panels
코어 밀도	32 kg/m³ nominal rigid polyisocyanurate insulation
열전도도 (Thermal Conductivity)	0.023 W/(m·K) at 10°C for the polyisocyanurate insulation
표면 마무리	Outdoor powder-coated galvanized steel with aluminum-copper or microchannel condenser
접합 유형	Bolted modular bases with common grooved water headers and independent isolation valves
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Two to sixteen coordinated modules with common headersIntegrated primary pump and buffer tankLow-ambient and low-noise packagesHeat-pump or cooling-only module configuration

Planning a Modular Air-Cooled Scroll Chiller specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.