Bank of modular air-cooled scroll chiller modules

クリーンルーム HVAC および空気処理装置

モジュラー空気冷却スクロールチラー

An expandable chilled-water system built from parallel air-cooled scroll modules that stage together as cleanroom cooling demand grows.

Expandable Parallel Modules
Independent Refrigerant Circuits
Fine Capacity Staging
Serviceable Without Total Shutdown

見積もりリクエスト製品案内

商品紹介

The modular air-cooled scroll chiller divides plant capacity among compact factory-built modules connected to common chilled-water headers and a coordinating controller. Each module contains scroll compressors, a liquid heat exchanger, condenser coil and fans. Additional modules increase capacity without replacing the original plant, while multiple compressors provide small operating steps. Isolation valves and independent circuits allow one module to be serviced while the remaining modules continue supplying partial cooling.

主要な特徴

Parallel modules allow cooling capacity to expand in planned increments as production demand increases.

Multiple scroll compressors provide small capacity steps and useful low-load turndown.

Independent refrigerant circuits confine a service event to one module rather than the complete plant.

A common controller rotates lead duty and stages modules against leaving-water temperature.

お客様の製品に関する懸念事項

A growing facility needs enough initial cooling without buying an oversized single chiller that will cycle inefficiently for years.

Initial cleanroom load is small but future production phases require more capacity.Additional matched modules connect to the common headers and controller as demand grows.

One chiller failure removes all process cooling.Independent modules continue operating at the remaining available capacity.

Unequal water flow causes some modules to trip while others carry little load.Reverse-return headers, balancing valves and coordinated pump control distribute flow.

Modules accumulate unequal compressor hours.Lead-lag rotation balances starts and run time across the staged plant.

典型的な用途

Phased cleanroom expansionsSmall pharmaceutical plantsLaboratory campuses医療機器製造Process cooling with staged demand

技術的なパラメータ

Representative single-module construction and chilled-water insulation data are listed below.

コア材料	Rigid polyisocyanurate foam around the brazed-plate evaporator and chilled-water headers
パネルの厚さ	1.0–1.5 mm removable module enclosure panels
有効幅	800–1500 mm nominal width per module
最大長さ	1900–2550 mm per factory module
鋼鉄の厚さを直面する	1.0–2.0 mm galvanized module frame and service panels
コア密度	32 kg/m³ nominal rigid polyisocyanurate insulation
熱伝導率	0.023 W/(m·K) at 10°C for the polyisocyanurate insulation
表面仕上げ	Outdoor powder-coated galvanized steel with aluminum-copper or microchannel condenser
ジョイントタイプ	Bolted modular bases with common grooved water headers and independent isolation valves
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Two to sixteen coordinated modules with common headersIntegrated primary pump and buffer tankLow-ambient and low-noise packagesHeat-pump or cooling-only module configuration

Planning a Modular Air-Cooled Scroll Chiller specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する