English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات تهوية وتكييف ومعالجة الهواء في الغرف النظيفة
وحدات تبريد الهواء التمرير مبرد
An expandable chilled-water system built from parallel air-cooled scroll modules that stage together as cleanroom cooling demand grows.
- Expandable Parallel Modules
- Independent Refrigerant Circuits
- Fine Capacity Staging
- Serviceable Without Total Shutdown
مقدمة المنتج
The modular air-cooled scroll chiller divides plant capacity among compact factory-built modules connected to common chilled-water headers and a coordinating controller. Each module contains scroll compressors, a liquid heat exchanger, condenser coil and fans. Additional modules increase capacity without replacing the original plant, while multiple compressors provide small operating steps. Isolation valves and independent circuits allow one module to be serviced while the remaining modules continue supplying partial cooling.
الخصائص الرئيسية
Multiple scroll compressors provide small capacity steps and useful low-load turndown.
Independent refrigerant circuits confine a service event to one module rather than the complete plant.
A common controller rotates lead duty and stages modules against leaving-water temperature.
مخاوف المنتج للعملاء
A growing facility needs enough initial cooling without buying an oversized single chiller that will cycle inefficiently for years.
Initial cleanroom load is small but future production phases require more capacity.Additional matched modules connect to the common headers and controller as demand grows.
One chiller failure removes all process cooling.Independent modules continue operating at the remaining available capacity.
Unequal water flow causes some modules to trip while others carry little load.Reverse-return headers, balancing valves and coordinated pump control distribute flow.
Modules accumulate unequal compressor hours.Lead-lag rotation balances starts and run time across the staged plant.
تطبيقات نموذجية
Phased cleanroom expansionsSmall pharmaceutical plantsLaboratory campusesMedical-device manufacturingProcess cooling with staged demand
المعلمات الفنية
Representative single-module construction and chilled-water insulation data are listed below.
| المواد الأساسية | Rigid polyisocyanurate foam around the brazed-plate evaporator and chilled-water headers |
|---|---|
| سمك اللوحة | 1.0–1.5 mm removable module enclosure panels |
| العرض الفعال | 800–1500 mm nominal width per module |
| الحد الأقصى الطول | 1900–2550 mm per factory module |
| الصلب يواجه سمك | 1.0–2.0 mm galvanized module frame and service panels |
| الكثافة الأساسية | 32 kg/m³ nominal rigid polyisocyanurate insulation |
| الموصلية الحرارية | 0.023 W/(m·K) at 10°C for the polyisocyanurate insulation |
| إنهاء السطح | Outdoor powder-coated galvanized steel with aluminum-copper or microchannel condenser |
| نوع المشترك | Bolted modular bases with common grooved water headers and independent isolation valves |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Two to sixteen coordinated modules with common headersIntegrated primary pump and buffer tankLow-ambient and low-noise packagesHeat-pump or cooling-only module configuration
Planning a Modular Air-Cooled Scroll Chiller specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
