Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraum HVAC und Luftbehandlung Ausrüstung
Modularer Luftgekühlter Scroll Chiller
An expandable chilled-water system built from parallel air-cooled scroll modules that stage together as cleanroom cooling demand grows.
- Expandable Parallel Modules
- Independent Refrigerant Circuits
- Fine Capacity Staging
- Serviceable Without Total Shutdown
Produkteinführung
The modular air-cooled scroll chiller divides plant capacity among compact factory-built modules connected to common chilled-water headers and a coordinating controller. Each module contains scroll compressors, a liquid heat exchanger, condenser coil and fans. Additional modules increase capacity without replacing the original plant, while multiple compressors provide small operating steps. Isolation valves and independent circuits allow one module to be serviced while the remaining modules continue supplying partial cooling.
Key Features
Multiple scroll compressors provide small capacity steps and useful low-load turndown.
Independent refrigerant circuits confine a service event to one module rather than the complete plant.
A common controller rotates lead duty and stages modules against leaving-water temperature.
Kunden Produktbedenken
A growing facility needs enough initial cooling without buying an oversized single chiller that will cycle inefficiently for years.
Initial cleanroom load is small but future production phases require more capacity.Additional matched modules connect to the common headers and controller as demand grows.
One chiller failure removes all process cooling.Independent modules continue operating at the remaining available capacity.
Unequal water flow causes some modules to trip while others carry little load.Reverse-return headers, balancing valves and coordinated pump control distribute flow.
Modules accumulate unequal compressor hours.Lead-lag rotation balances starts and run time across the staged plant.
Typische Anwendungen
Phased cleanroom expansionsSmall pharmaceutical plantsLaboratory campusesMedizinische Geräte HerstellungProcess cooling with staged demand
Technische Parameter
Representative single-module construction and chilled-water insulation data are listed below.
| Core Material | Rigid polyisocyanurate foam around the brazed-plate evaporator and chilled-water headers |
|---|---|
| Panel Dicke | 1.0–1.5 mm removable module enclosure panels |
| Effektive Breite | 800–1500 mm nominal width per module |
| Maximale Länge | 1900–2550 mm per factory module |
| Stahl facing Dicke | 1.0–2.0 mm galvanized module frame and service panels |
| Kerndichte | 32 kg/m³ nominal rigid polyisocyanurate insulation |
| Thermische Leitfähigkeit | 0.023 W/(m·K) at 10°C for the polyisocyanurate insulation |
| Oberfläche Finish | Outdoor powder-coated galvanized steel with aluminum-copper or microchannel condenser |
| Gemeinsamer Typ | Bolted modular bases with common grooved water headers and independent isolation valves |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Two to sixteen coordinated modules with common headersIntegrated primary pump and buffer tankLow-ambient and low-noise packagesHeat-pump or cooling-only module configuration
Planning a Modular Air-Cooled Scroll Chiller specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
