Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Iluminação de sala limpa e equipamentos elétricos
Fornecimento de energia de emergência para sala limpa
A central battery and changeover cabinet that supplies selected cleanroom emergency circuits when the normal source is unavailable.
- Central Battery Bank
- Automatic Source Changeover
- Dedicated Emergency Feeders
- Monitored Charger and Alarms
Introdução do produto
This emergency supply combines a charger, battery bank, inverter or DC distribution, automatic transfer logic and protected outgoing circuits in one monitored system. Unlike a general UPS serving connected equipment, it is arranged around defined emergency loads such as egress lighting, intercom, access release and control circuits. A front mimic display shows source, battery, output and fault conditions.
Características-chave
Automatic transfer logic energizes the backup path after loss of the monitored source.
The charger maintains the battery and reports low-voltage or battery fault conditions.
A mimic panel displays normal source, standby source and feeder status clearly.
An external maintenance bypass can preserve supply during cabinet service.
Preocupações do produto do cliente
Emergency circuits must start reliably, remain clearly segregated and reveal battery or charger faults before a real supply failure.
Emergency and normal loads are mixed in one unmarked panel.Dedicated labeled feeders and separated terminals preserve circuit identity.
A failed charger remains unnoticed until the battery is needed.Continuous battery and charger supervision activates visible and remote alarms.
Transfer delay disrupts sensitive control circuits.The selected inverter or DC architecture matches the continuity requirement of each load.
Servicing the battery cabinet removes all emergency power.An optional maintenance bypass or alternate input supports planned work.
Aplicações típicas
Cleanroom emergency lightingDoor-release and intercom backupCritical alarm circuitsSelected ventilation controls
Parâmetros técnicos
Typical configurable construction ranges for a cleanroom emergency power supply are listed below.
| Material principal | Steel or stainless cabinet with charger, batteries, inverter or DC bus, automatic changeover and protected feeders |
|---|---|
| Painel de espessura | 400-900 mm cabinet depth |
| Largura efetiva | 600-1600 mm assembled cabinet width |
| Comprimento máximo | Up to 2200 mm floor-standing height |
| Aço enfrentando espessura | 1.5-2.0 mm cabinet body and doors |
| Densidade Core | Approximately 7850-8000 kg/m³ for steel or stainless cabinet material |
| Condutividade térmica | 14-60 W/(m·K) depending on stainless or carbon-steel enclosure |
| Superfície acabado | Light-grey, white or brushed stainless enclosure with colored mimic and alarm indicators |
| Tipo conjunto | Gasketed modular cabinet with separated battery/power compartments and gland-plate cable entries |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
AC inverter or DC outputLithium-ion or VRLA battery bankIntegrated automatic transfer switchRemote alarm communication
Planning a Cleanroom Emergency Power Supply specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
