Pembekal Satu Henti Anda untuk Peralatan Bilik Bersih dan Kemudahan AseptikSokongan Projek Antarabangsa
Open mobile navigationClose mobile navigation
Pencahayaan bilik bersih dan peralatan elektrik

Bekalan Kuasa Kecemasan Bilik Bersih

A central battery and changeover cabinet that supplies selected cleanroom emergency circuits when the normal source is unavailable.
  • Central Battery Bank
  • Automatic Source Changeover
  • Dedicated Emergency Feeders
  • Monitored Charger and Alarms
Permintaan sebut harga Semak imbas produk

Pengenalan Produk

This emergency supply combines a charger, battery bank, inverter or DC distribution, automatic transfer logic and protected outgoing circuits in one monitored system. Unlike a general UPS serving connected equipment, it is arranged around defined emergency loads such as egress lighting, intercom, access release and control circuits. A front mimic display shows source, battery, output and fault conditions.

Ciri-ciri Utama

Dedicated outgoing feeders separate emergency loads from normal branch circuits.

Automatic transfer logic energizes the backup path after loss of the monitored source.

The charger maintains the battery and reports low-voltage or battery fault conditions.

A mimic panel displays normal source, standby source and feeder status clearly.

An external maintenance bypass can preserve supply during cabinet service.

Kebimbangan Produk Pelanggan

Emergency circuits must start reliably, remain clearly segregated and reveal battery or charger faults before a real supply failure.

Emergency and normal loads are mixed in one unmarked panel.Dedicated labeled feeders and separated terminals preserve circuit identity.
A failed charger remains unnoticed until the battery is needed.Continuous battery and charger supervision activates visible and remote alarms.
Transfer delay disrupts sensitive control circuits.The selected inverter or DC architecture matches the continuity requirement of each load.
Servicing the battery cabinet removes all emergency power.An optional maintenance bypass or alternate input supports planned work.

Permohonan yang biasa

Cleanroom emergency lightingDoor-release and intercom backupCritical alarm circuitsSelected ventilation controls

Parameter teknikal

Typical configurable construction ranges for a cleanroom emergency power supply are listed below.

Bahan TerasSteel or stainless cabinet with charger, batteries, inverter or DC bus, automatic changeover and protected feeders
Ketebalan Panel400-900 mm cabinet depth
Lebar berkesan600-1600 mm assembled cabinet width
Panjang maksimumUp to 2200 mm floor-standing height
Keluli Menghadapi Ketebalan1.5-2.0 mm cabinet body and doors
Ketumpatan terasApproximately 7850-8000 kg/m³ for steel or stainless cabinet material
Kekonduksian Terma14-60 W/(m·K) depending on stainless or carbon-steel enclosure
Kemasan permukaanLight-grey, white or brushed stainless enclosure with colored mimic and alarm indicators
Jenis BersatuGasketed modular cabinet with separated battery/power compartments and gland-plate cable entries
PenyesuaianBoleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

AC inverter or DC outputLithium-ion or VRLA battery bankIntegrated automatic transfer switchRemote alarm communication

Planning a Cleanroom Emergency Power Supply specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami
Email Kami WhatsApp WeChat

Laman Utama

Produk

Berita

Tentang Kami

Hubungi Kami