Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Iluminación de sala limpia y equipos eléctricos
Suministro de energía de emergencia para sala limpia
A central battery and changeover cabinet that supplies selected cleanroom emergency circuits when the normal source is unavailable.
- Central Battery Bank
- Automatic Source Changeover
- Dedicated Emergency Feeders
- Monitored Charger and Alarms
Introducción del producto
This emergency supply combines a charger, battery bank, inverter or DC distribution, automatic transfer logic and protected outgoing circuits in one monitored system. Unlike a general UPS serving connected equipment, it is arranged around defined emergency loads such as egress lighting, intercom, access release and control circuits. A front mimic display shows source, battery, output and fault conditions.
Características clave
Automatic transfer logic energizes the backup path after loss of the monitored source.
The charger maintains the battery and reports low-voltage or battery fault conditions.
A mimic panel displays normal source, standby source and feeder status clearly.
An external maintenance bypass can preserve supply during cabinet service.
Preocupaciones del producto del cliente
Emergency circuits must start reliably, remain clearly segregated and reveal battery or charger faults before a real supply failure.
Emergency and normal loads are mixed in one unmarked panel.Dedicated labeled feeders and separated terminals preserve circuit identity.
A failed charger remains unnoticed until the battery is needed.Continuous battery and charger supervision activates visible and remote alarms.
Transfer delay disrupts sensitive control circuits.The selected inverter or DC architecture matches the continuity requirement of each load.
Servicing the battery cabinet removes all emergency power.An optional maintenance bypass or alternate input supports planned work.
Aplicaciones típicas
Cleanroom emergency lightingDoor-release and intercom backupCritical alarm circuitsSelected ventilation controls
Parámetros técnicos
Typical configurable construction ranges for a cleanroom emergency power supply are listed below.
| Materiales Core | Steel or stainless cabinet with charger, batteries, inverter or DC bus, automatic changeover and protected feeders |
|---|---|
| Panel de espesor | 400-900 mm cabinet depth |
| Ancho efectivo | 600-1600 mm assembled cabinet width |
| Longitud máxima | Up to 2200 mm floor-standing height |
| Acero frente a espesor | 1.5-2.0 mm cabinet body and doors |
| Densidad Core | Approximately 7850-8000 kg/m³ for steel or stainless cabinet material |
| Conductividad térmica | 14-60 W/(m·K) depending on stainless or carbon-steel enclosure |
| Superficie acabada | Light-grey, white or brushed stainless enclosure with colored mimic and alarm indicators |
| Tipo conjunto | Gasketed modular cabinet with separated battery/power compartments and gland-plate cable entries |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
AC inverter or DC outputLithium-ion or VRLA battery bankIntegrated automatic transfer switchRemote alarm communication
Planning a Cleanroom Emergency Power Supply specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
