Cleanroom emergency power supply cabinet with color mimic display

Cleanroom Lighting dan Peralatan Listrik

Cleanroom Emergency Power Supply (Cemasku Daya Darurat)

A central battery and changeover cabinet that supplies selected cleanroom emergency circuits when the normal source is unavailable.

Central Battery Bank
Automatic Source Changeover
Dedicated Emergency Feeders
Monitored Charger and Alarms

Permintaan untuk kutipan Browse Produk

Perkenalan produk

This emergency supply combines a charger, battery bank, inverter or DC distribution, automatic transfer logic and protected outgoing circuits in one monitored system. Unlike a general UPS serving connected equipment, it is arranged around defined emergency loads such as egress lighting, intercom, access release and control circuits. A front mimic display shows source, battery, output and fault conditions.

Fitur utama:

Dedicated outgoing feeders separate emergency loads from normal branch circuits.

Automatic transfer logic energizes the backup path after loss of the monitored source.

The charger maintains the battery and reports low-voltage or battery fault conditions.

A mimic panel displays normal source, standby source and feeder status clearly.

An external maintenance bypass can preserve supply during cabinet service.

Kekhawatiran produk pelanggan

Emergency circuits must start reliably, remain clearly segregated and reveal battery or charger faults before a real supply failure.

Emergency and normal loads are mixed in one unmarked panel.Dedicated labeled feeders and separated terminals preserve circuit identity.

A failed charger remains unnoticed until the battery is needed.Continuous battery and charger supervision activates visible and remote alarms.

Transfer delay disrupts sensitive control circuits.The selected inverter or DC architecture matches the continuity requirement of each load.

Servicing the battery cabinet removes all emergency power.An optional maintenance bypass or alternate input supports planned work.

Aplikasi yang Tipis

Cleanroom emergency lightingDoor-release and intercom backupCritical alarm circuitsSelected ventilation controls

Parameter teknis

Typical configurable construction ranges for a cleanroom emergency power supply are listed below.

Bahan inti	Steel or stainless cabinet with charger, batteries, inverter or DC bus, automatic changeover and protected feeders
Ketebalan Panel (Panel Thickness)	400-900 mm cabinet depth
Efektif lebar	600-1600 mm assembled cabinet width
Panjang maksimum	Up to 2200 mm floor-standing height
Baja menghadap ketebalan	1.5-2.0 mm cabinet body and doors
Kepadatan inti (core density)	Approximately 7850-8000 kg/m³ for steel or stainless cabinet material
Konduktivitas Termal (Thermal Conductivity)	14-60 W/(m·K) depending on stainless or carbon-steel enclosure
Permukaan selesai	Light-grey, white or brushed stainless enclosure with colored mimic and alarm indicators
Jenis Bersama	Gasketed modular cabinet with separated battery/power compartments and gland-plate cable entries
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

AC inverter or DC outputLithium-ion or VRLA battery bankIntegrated automatic transfer switchRemote alarm communication

Planning a Cleanroom Emergency Power Supply specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami