Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Éclairage de salle blanche et équipements électriques
Alimentation électrique d'urgence Cleanroom
A central battery and changeover cabinet that supplies selected cleanroom emergency circuits when the normal source is unavailable.
- Central Battery Bank
- Automatic Source Changeover
- Dedicated Emergency Feeders
- Monitored Charger and Alarms
Introduction de produit
This emergency supply combines a charger, battery bank, inverter or DC distribution, automatic transfer logic and protected outgoing circuits in one monitored system. Unlike a general UPS serving connected equipment, it is arranged around defined emergency loads such as egress lighting, intercom, access release and control circuits. A front mimic display shows source, battery, output and fault conditions.
Key Features
Automatic transfer logic energizes the backup path after loss of the monitored source.
The charger maintains the battery and reports low-voltage or battery fault conditions.
A mimic panel displays normal source, standby source and feeder status clearly.
An external maintenance bypass can preserve supply during cabinet service.
Préoccupations du client produit
Emergency circuits must start reliably, remain clearly segregated and reveal battery or charger faults before a real supply failure.
Emergency and normal loads are mixed in one unmarked panel.Dedicated labeled feeders and separated terminals preserve circuit identity.
A failed charger remains unnoticed until the battery is needed.Continuous battery and charger supervision activates visible and remote alarms.
Transfer delay disrupts sensitive control circuits.The selected inverter or DC architecture matches the continuity requirement of each load.
Servicing the battery cabinet removes all emergency power.An optional maintenance bypass or alternate input supports planned work.
Les applications typiques
Cleanroom emergency lightingDoor-release and intercom backupCritical alarm circuitsSelected ventilation controls
Paramètres techniques
Typical configurable construction ranges for a cleanroom emergency power supply are listed below.
| Matériaux de base | Steel or stainless cabinet with charger, batteries, inverter or DC bus, automatic changeover and protected feeders |
|---|---|
| Panneau épaisseur | 400-900 mm cabinet depth |
| Largeur effective | 600-1600 mm assembled cabinet width |
| Longueur maximale | Up to 2200 mm floor-standing height |
| Acier face épaisseur | 1.5-2.0 mm cabinet body and doors |
| Densité Core | Approximately 7850-8000 kg/m³ for steel or stainless cabinet material |
| Conductivité thermique | 14-60 W/(m·K) depending on stainless or carbon-steel enclosure |
| surface finie | Light-grey, white or brushed stainless enclosure with colored mimic and alarm indicators |
| Type joint | Gasketed modular cabinet with separated battery/power compartments and gland-plate cable entries |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
AC inverter or DC outputLithium-ion or VRLA battery bankIntegrated automatic transfer switchRemote alarm communication
Planning a Cleanroom Emergency Power Supply specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
