English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Освещение и электрическое оборудование в чистых помещениях
Аварийное питание в чистых помещениях
A central battery and changeover cabinet that supplies selected cleanroom emergency circuits when the normal source is unavailable.
- Central Battery Bank
- Automatic Source Changeover
- Dedicated Emergency Feeders
- Monitored Charger and Alarms
Введение продукции
This emergency supply combines a charger, battery bank, inverter or DC distribution, automatic transfer logic and protected outgoing circuits in one monitored system. Unlike a general UPS serving connected equipment, it is arranged around defined emergency loads such as egress lighting, intercom, access release and control circuits. A front mimic display shows source, battery, output and fault conditions.
Основные характеристики
Automatic transfer logic energizes the backup path after loss of the monitored source.
The charger maintains the battery and reports low-voltage or battery fault conditions.
A mimic panel displays normal source, standby source and feeder status clearly.
An external maintenance bypass can preserve supply during cabinet service.
Обеспокоенность клиентов продуктами
Emergency circuits must start reliably, remain clearly segregated and reveal battery or charger faults before a real supply failure.
Emergency and normal loads are mixed in one unmarked panel.Dedicated labeled feeders and separated terminals preserve circuit identity.
A failed charger remains unnoticed until the battery is needed.Continuous battery and charger supervision activates visible and remote alarms.
Transfer delay disrupts sensitive control circuits.The selected inverter or DC architecture matches the continuity requirement of each load.
Servicing the battery cabinet removes all emergency power.An optional maintenance bypass or alternate input supports planned work.
Типичные приложения
Cleanroom emergency lightingDoor-release and intercom backupCritical alarm circuitsSelected ventilation controls
Технические параметры
Typical configurable construction ranges for a cleanroom emergency power supply are listed below.
| Основной материал | Steel or stainless cabinet with charger, batteries, inverter or DC bus, automatic changeover and protected feeders |
|---|---|
| Толщина панели | 400-900 mm cabinet depth |
| эффективная ширина | 600-1600 mm assembled cabinet width |
| Максимальная длина | Up to 2200 mm floor-standing height |
| Толщина линий стали | 1.5-2.0 mm cabinet body and doors |
| Плотность ядра | Approximately 7850-8000 kg/m³ for steel or stainless cabinet material |
| Теплопроводимость | 14-60 W/(m·K) depending on stainless or carbon-steel enclosure |
| Поверхностная отделка | Light-grey, white or brushed stainless enclosure with colored mimic and alarm indicators |
| Объединенный тип | Gasketed modular cabinet with separated battery/power compartments and gland-plate cable entries |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
AC inverter or DC outputLithium-ion or VRLA battery bankIntegrated automatic transfer switchRemote alarm communication
Planning a Cleanroom Emergency Power Supply specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
