İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Aydınlatma ve Elektrik Ekipmanları
Temiz Oda Acil Güç Kaynağı
A central battery and changeover cabinet that supplies selected cleanroom emergency circuits when the normal source is unavailable.
- Central Battery Bank
- Automatic Source Changeover
- Dedicated Emergency Feeders
- Monitored Charger and Alarms
Ürün tanıtımı
This emergency supply combines a charger, battery bank, inverter or DC distribution, automatic transfer logic and protected outgoing circuits in one monitored system. Unlike a general UPS serving connected equipment, it is arranged around defined emergency loads such as egress lighting, intercom, access release and control circuits. A front mimic display shows source, battery, output and fault conditions.
Ana Özellikler
Automatic transfer logic energizes the backup path after loss of the monitored source.
The charger maintains the battery and reports low-voltage or battery fault conditions.
A mimic panel displays normal source, standby source and feeder status clearly.
An external maintenance bypass can preserve supply during cabinet service.
Müşteri Ürün Sorunları
Emergency circuits must start reliably, remain clearly segregated and reveal battery or charger faults before a real supply failure.
Emergency and normal loads are mixed in one unmarked panel.Dedicated labeled feeders and separated terminals preserve circuit identity.
A failed charger remains unnoticed until the battery is needed.Continuous battery and charger supervision activates visible and remote alarms.
Transfer delay disrupts sensitive control circuits.The selected inverter or DC architecture matches the continuity requirement of each load.
Servicing the battery cabinet removes all emergency power.An optional maintenance bypass or alternate input supports planned work.
Tipik uygulamalar
Cleanroom emergency lightingDoor-release and intercom backupCritical alarm circuitsSelected ventilation controls
Teknik parametreler
Typical configurable construction ranges for a cleanroom emergency power supply are listed below.
| Temel malzemeler | Steel or stainless cabinet with charger, batteries, inverter or DC bus, automatic changeover and protected feeders |
|---|---|
| Panel kalınlığı | 400-900 mm cabinet depth |
| Effective Width (Etkili Genişlik) | 600-1600 mm assembled cabinet width |
| Maksimum uzunluk | Up to 2200 mm floor-standing height |
| Çelik yüz yüze kalınlığı | 1.5-2.0 mm cabinet body and doors |
| Core Density (Çekirdek Yoğunluğu) | Approximately 7850-8000 kg/m³ for steel or stainless cabinet material |
| Termal İletkenlik | 14-60 W/(m·K) depending on stainless or carbon-steel enclosure |
| Yüzey bitirme | Light-grey, white or brushed stainless enclosure with colored mimic and alarm indicators |
| Ortak tip | Gasketed modular cabinet with separated battery/power compartments and gland-plate cable entries |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
AC inverter or DC outputLithium-ion or VRLA battery bankIntegrated automatic transfer switchRemote alarm communication
Planning a Cleanroom Emergency Power Supply specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
