English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
إضاءة الغرف النظيفة والمعدات الكهربائية
غرفة نظيفة الطوارئ امدادات الطاقة
A central battery and changeover cabinet that supplies selected cleanroom emergency circuits when the normal source is unavailable.
- Central Battery Bank
- Automatic Source Changeover
- Dedicated Emergency Feeders
- Monitored Charger and Alarms
مقدمة المنتج
This emergency supply combines a charger, battery bank, inverter or DC distribution, automatic transfer logic and protected outgoing circuits in one monitored system. Unlike a general UPS serving connected equipment, it is arranged around defined emergency loads such as egress lighting, intercom, access release and control circuits. A front mimic display shows source, battery, output and fault conditions.
الخصائص الرئيسية
Automatic transfer logic energizes the backup path after loss of the monitored source.
The charger maintains the battery and reports low-voltage or battery fault conditions.
A mimic panel displays normal source, standby source and feeder status clearly.
An external maintenance bypass can preserve supply during cabinet service.
مخاوف المنتج للعملاء
Emergency circuits must start reliably, remain clearly segregated and reveal battery or charger faults before a real supply failure.
Emergency and normal loads are mixed in one unmarked panel.Dedicated labeled feeders and separated terminals preserve circuit identity.
A failed charger remains unnoticed until the battery is needed.Continuous battery and charger supervision activates visible and remote alarms.
Transfer delay disrupts sensitive control circuits.The selected inverter or DC architecture matches the continuity requirement of each load.
Servicing the battery cabinet removes all emergency power.An optional maintenance bypass or alternate input supports planned work.
تطبيقات نموذجية
Cleanroom emergency lightingDoor-release and intercom backupCritical alarm circuitsSelected ventilation controls
المعلمات الفنية
Typical configurable construction ranges for a cleanroom emergency power supply are listed below.
| المواد الأساسية | Steel or stainless cabinet with charger, batteries, inverter or DC bus, automatic changeover and protected feeders |
|---|---|
| سمك اللوحة | 400-900 mm cabinet depth |
| العرض الفعال | 600-1600 mm assembled cabinet width |
| الحد الأقصى الطول | Up to 2200 mm floor-standing height |
| الصلب يواجه سمك | 1.5-2.0 mm cabinet body and doors |
| الكثافة الأساسية | Approximately 7850-8000 kg/m³ for steel or stainless cabinet material |
| الموصلية الحرارية | 14-60 W/(m·K) depending on stainless or carbon-steel enclosure |
| إنهاء السطح | Light-grey, white or brushed stainless enclosure with colored mimic and alarm indicators |
| نوع المشترك | Gasketed modular cabinet with separated battery/power compartments and gland-plate cable entries |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
AC inverter or DC outputLithium-ion or VRLA battery bankIntegrated automatic transfer switchRemote alarm communication
Planning a Cleanroom Emergency Power Supply specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
