Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Equipamento de sala limpa Peças de reposição
Z Sensor infravermelho do chuveiro de ar
A compact photoelectric sensor that detects entry or occupancy signals for automatic air shower cycle and door-control logic.
- Non-Contact Detection
- Compact Black Housing
- Visible Status Indicator
- Secure Two-Ear Mounting
Introdução do produto
The air shower infrared sensor provides a non-contact presence signal to the sequence controller when a person or material load enters the sensing zone. A dark optical window shields the emitter and receiver components, while the status LED supports alignment and service checks. Side mounting ears hold the sensing face in a repeatable position inside the chamber. Replacement compatibility depends on sensing principle, supply voltage, output logic, connector arrangement and required detection distance.
Características-chave
A tinted optical window protects the sensing elements from routine chamber cleaning.
The visible indicator provides immediate confirmation of detection status.
Twin metal mounting ears support stable alignment on the air-shower panel.
Preocupações do produto do cliente
Reliable cycle triggering requires a sensor that matches the controller input and remains correctly aimed in the chamber.
A narrow or misaligned detection zone fails to register chamber entry.Twin mounting ears provide repeatable positioning toward the intended sensing area.
An incompatible output signal cannot trigger the existing controller.Output logic and supply configuration are selected for the installed control input.
Contamination on exposed optics causes unstable sensing.The smooth tinted window presents a protected, wipe-clean optical face.
Technicians cannot quickly confirm whether the sensor is switching.A dedicated green indicator displays local detection status during testing.
Aplicações típicas
Personnel air shower occupancy detectionMaterial air shower entry sensingAutomatic shower-cycle triggeringCleanroom door-sequence control
Parâmetros técnicos
Typical construction and dimensional ranges for compact air shower photoelectric sensors are shown below.
| Material principal | Polycarbonate sensor housing with infrared emitter, receiver and electronic switching circuit |
|---|---|
| Painel de espessura | 25-60 mm nominal sensor housing depth |
| Largura efetiva | 45-90 mm nominal body width excluding mounting ears |
| Comprimento máximo | Up to 150 mm overall height including connector |
| Aço enfrentando espessura | 1.0-2.0 mm stainless-steel mounting-ear thickness |
| Densidade Core | 1180-1220 kg/m³ for polycarbonate housing material |
| Condutividade térmica | 0.19-0.22 W/(m·K) for polycarbonate housing material |
| Superfície acabado | Matte black housing with dark-red optical window and green status indicator |
| Tipo conjunto | Sealed two-piece housing with twin mounting ears and threaded cable connector |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Matched supply voltagePNP or NPN switching outputAdjustable detection distanceAlternative cable and connector lengths
Planning a Air Shower Infrared Sensor specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
