English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
غرف الأبحاث معدات قطع الغيار
Air دش الأشعة تحت الحمراء الاستشعار
A compact photoelectric sensor that detects entry or occupancy signals for automatic air shower cycle and door-control logic.
- Non-Contact Detection
- Compact Black Housing
- Visible Status Indicator
- Secure Two-Ear Mounting
مقدمة المنتج
The air shower infrared sensor provides a non-contact presence signal to the sequence controller when a person or material load enters the sensing zone. A dark optical window shields the emitter and receiver components, while the status LED supports alignment and service checks. Side mounting ears hold the sensing face in a repeatable position inside the chamber. Replacement compatibility depends on sensing principle, supply voltage, output logic, connector arrangement and required detection distance.
الخصائص الرئيسية
A tinted optical window protects the sensing elements from routine chamber cleaning.
The visible indicator provides immediate confirmation of detection status.
Twin metal mounting ears support stable alignment on the air-shower panel.
مخاوف المنتج للعملاء
Reliable cycle triggering requires a sensor that matches the controller input and remains correctly aimed in the chamber.
A narrow or misaligned detection zone fails to register chamber entry.Twin mounting ears provide repeatable positioning toward the intended sensing area.
An incompatible output signal cannot trigger the existing controller.Output logic and supply configuration are selected for the installed control input.
Contamination on exposed optics causes unstable sensing.The smooth tinted window presents a protected, wipe-clean optical face.
Technicians cannot quickly confirm whether the sensor is switching.A dedicated green indicator displays local detection status during testing.
تطبيقات نموذجية
Personnel air shower occupancy detectionMaterial air shower entry sensingAutomatic shower-cycle triggeringCleanroom door-sequence control
المعلمات الفنية
Typical construction and dimensional ranges for compact air shower photoelectric sensors are shown below.
| المواد الأساسية | Polycarbonate sensor housing with infrared emitter, receiver and electronic switching circuit |
|---|---|
| سمك اللوحة | 25-60 mm nominal sensor housing depth |
| العرض الفعال | 45-90 mm nominal body width excluding mounting ears |
| الحد الأقصى الطول | Up to 150 mm overall height including connector |
| الصلب يواجه سمك | 1.0-2.0 mm stainless-steel mounting-ear thickness |
| الكثافة الأساسية | 1180-1220 kg/m³ for polycarbonate housing material |
| الموصلية الحرارية | 0.19-0.22 W/(m·K) for polycarbonate housing material |
| إنهاء السطح | Matte black housing with dark-red optical window and green status indicator |
| نوع المشترك | Sealed two-piece housing with twin mounting ears and threaded cable connector |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Matched supply voltagePNP or NPN switching outputAdjustable detection distanceAlternative cable and connector lengths
Planning a Air Shower Infrared Sensor specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
