Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Cleanroom Equipment Ersatzteile
Luft Dusche Infrarot-Sensor
A compact photoelectric sensor that detects entry or occupancy signals for automatic air shower cycle and door-control logic.
- Non-Contact Detection
- Compact Black Housing
- Visible Status Indicator
- Secure Two-Ear Mounting
Produkteinführung
The air shower infrared sensor provides a non-contact presence signal to the sequence controller when a person or material load enters the sensing zone. A dark optical window shields the emitter and receiver components, while the status LED supports alignment and service checks. Side mounting ears hold the sensing face in a repeatable position inside the chamber. Replacement compatibility depends on sensing principle, supply voltage, output logic, connector arrangement and required detection distance.
Key Features
A tinted optical window protects the sensing elements from routine chamber cleaning.
The visible indicator provides immediate confirmation of detection status.
Twin metal mounting ears support stable alignment on the air-shower panel.
Kunden Produktbedenken
Reliable cycle triggering requires a sensor that matches the controller input and remains correctly aimed in the chamber.
A narrow or misaligned detection zone fails to register chamber entry.Twin mounting ears provide repeatable positioning toward the intended sensing area.
An incompatible output signal cannot trigger the existing controller.Output logic and supply configuration are selected for the installed control input.
Contamination on exposed optics causes unstable sensing.The smooth tinted window presents a protected, wipe-clean optical face.
Technicians cannot quickly confirm whether the sensor is switching.A dedicated green indicator displays local detection status during testing.
Typische Anwendungen
Personnel air shower occupancy detectionMaterial air shower entry sensingAutomatic shower-cycle triggeringCleanroom door-sequence control
Technische Parameter
Typical construction and dimensional ranges for compact air shower photoelectric sensors are shown below.
| Core Material | Polycarbonate sensor housing with infrared emitter, receiver and electronic switching circuit |
|---|---|
| Panel Dicke | 25-60 mm nominal sensor housing depth |
| Effektive Breite | 45-90 mm nominal body width excluding mounting ears |
| Maximale Länge | Up to 150 mm overall height including connector |
| Stahl facing Dicke | 1.0-2.0 mm stainless-steel mounting-ear thickness |
| Kerndichte | 1180-1220 kg/m³ for polycarbonate housing material |
| Thermische Leitfähigkeit | 0.19-0.22 W/(m·K) for polycarbonate housing material |
| Oberfläche Finish | Matte black housing with dark-red optical window and green status indicator |
| Gemeinsamer Typ | Sealed two-piece housing with twin mounting ears and threaded cable connector |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Matched supply voltagePNP or NPN switching outputAdjustable detection distanceAlternative cable and connector lengths
Planning a Air Shower Infrared Sensor specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
