Three-quarter view of a cleanroom air shower infrared presence sensor

클린룸 장비 예비 부품

Air Shower Infrared 센서

A compact photoelectric sensor that detects entry or occupancy signals for automatic air shower cycle and door-control logic.

Non-Contact Detection
Compact Black Housing
Visible Status Indicator
Secure Two-Ear Mounting

견적 요청 제품 찾아보기

상품 소개

The air shower infrared sensor provides a non-contact presence signal to the sequence controller when a person or material load enters the sensing zone. A dark optical window shields the emitter and receiver components, while the status LED supports alignment and service checks. Side mounting ears hold the sensing face in a repeatable position inside the chamber. Replacement compatibility depends on sensing principle, supply voltage, output logic, connector arrangement and required detection distance.

주요 기능

Non-contact detection avoids switches that require physical actuation.

A tinted optical window protects the sensing elements from routine chamber cleaning.

The visible indicator provides immediate confirmation of detection status.

Twin metal mounting ears support stable alignment on the air-shower panel.

고객 제품 관심사

Reliable cycle triggering requires a sensor that matches the controller input and remains correctly aimed in the chamber.

A narrow or misaligned detection zone fails to register chamber entry.Twin mounting ears provide repeatable positioning toward the intended sensing area.

An incompatible output signal cannot trigger the existing controller.Output logic and supply configuration are selected for the installed control input.

Contamination on exposed optics causes unstable sensing.The smooth tinted window presents a protected, wipe-clean optical face.

Technicians cannot quickly confirm whether the sensor is switching.A dedicated green indicator displays local detection status during testing.

일반적인 응용 프로그램

Personnel air shower occupancy detectionMaterial air shower entry sensingAutomatic shower-cycle triggeringCleanroom door-sequence control

기술 매개변수

Typical construction and dimensional ranges for compact air shower photoelectric sensors are shown below.

핵심 재료	Polycarbonate sensor housing with infrared emitter, receiver and electronic switching circuit
패널 두께	25-60 mm nominal sensor housing depth
유효 폭	45-90 mm nominal body width excluding mounting ears
최대 길이	Up to 150 mm overall height including connector
강철 면면 두께	1.0-2.0 mm stainless-steel mounting-ear thickness
코어 밀도	1180-1220 kg/m³ for polycarbonate housing material
열전도도 (Thermal Conductivity)	0.19-0.22 W/(m·K) for polycarbonate housing material
표면 마무리	Matte black housing with dark-red optical window and green status indicator
접합 유형	Sealed two-piece housing with twin mounting ears and threaded cable connector
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Matched supply voltagePNP or NPN switching outputAdjustable detection distanceAlternative cable and connector lengths

Planning a Air Shower Infrared Sensor specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.