English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Запчасти для оборудования для чистых помещений
Инфракрасный датчик воздушного душа
A compact photoelectric sensor that detects entry or occupancy signals for automatic air shower cycle and door-control logic.
- Non-Contact Detection
- Compact Black Housing
- Visible Status Indicator
- Secure Two-Ear Mounting
Введение продукции
The air shower infrared sensor provides a non-contact presence signal to the sequence controller when a person or material load enters the sensing zone. A dark optical window shields the emitter and receiver components, while the status LED supports alignment and service checks. Side mounting ears hold the sensing face in a repeatable position inside the chamber. Replacement compatibility depends on sensing principle, supply voltage, output logic, connector arrangement and required detection distance.
Основные характеристики
A tinted optical window protects the sensing elements from routine chamber cleaning.
The visible indicator provides immediate confirmation of detection status.
Twin metal mounting ears support stable alignment on the air-shower panel.
Обеспокоенность клиентов продуктами
Reliable cycle triggering requires a sensor that matches the controller input and remains correctly aimed in the chamber.
A narrow or misaligned detection zone fails to register chamber entry.Twin mounting ears provide repeatable positioning toward the intended sensing area.
An incompatible output signal cannot trigger the existing controller.Output logic and supply configuration are selected for the installed control input.
Contamination on exposed optics causes unstable sensing.The smooth tinted window presents a protected, wipe-clean optical face.
Technicians cannot quickly confirm whether the sensor is switching.A dedicated green indicator displays local detection status during testing.
Типичные приложения
Personnel air shower occupancy detectionMaterial air shower entry sensingAutomatic shower-cycle triggeringCleanroom door-sequence control
Технические параметры
Typical construction and dimensional ranges for compact air shower photoelectric sensors are shown below.
| Основной материал | Polycarbonate sensor housing with infrared emitter, receiver and electronic switching circuit |
|---|---|
| Толщина панели | 25-60 mm nominal sensor housing depth |
| эффективная ширина | 45-90 mm nominal body width excluding mounting ears |
| Максимальная длина | Up to 150 mm overall height including connector |
| Толщина линий стали | 1.0-2.0 mm stainless-steel mounting-ear thickness |
| Плотность ядра | 1180-1220 kg/m³ for polycarbonate housing material |
| Теплопроводимость | 0.19-0.22 W/(m·K) for polycarbonate housing material |
| Поверхностная отделка | Matte black housing with dark-red optical window and green status indicator |
| Объединенный тип | Sealed two-piece housing with twin mounting ears and threaded cable connector |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Matched supply voltagePNP or NPN switching outputAdjustable detection distanceAlternative cable and connector lengths
Planning a Air Shower Infrared Sensor specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
