Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de sala limpia piezas de repuesto
Ducha de aire Sensor infrarrojo
A compact photoelectric sensor that detects entry or occupancy signals for automatic air shower cycle and door-control logic.
- Non-Contact Detection
- Compact Black Housing
- Visible Status Indicator
- Secure Two-Ear Mounting
Introducción del producto
The air shower infrared sensor provides a non-contact presence signal to the sequence controller when a person or material load enters the sensing zone. A dark optical window shields the emitter and receiver components, while the status LED supports alignment and service checks. Side mounting ears hold the sensing face in a repeatable position inside the chamber. Replacement compatibility depends on sensing principle, supply voltage, output logic, connector arrangement and required detection distance.
Características clave
A tinted optical window protects the sensing elements from routine chamber cleaning.
The visible indicator provides immediate confirmation of detection status.
Twin metal mounting ears support stable alignment on the air-shower panel.
Preocupaciones del producto del cliente
Reliable cycle triggering requires a sensor that matches the controller input and remains correctly aimed in the chamber.
A narrow or misaligned detection zone fails to register chamber entry.Twin mounting ears provide repeatable positioning toward the intended sensing area.
An incompatible output signal cannot trigger the existing controller.Output logic and supply configuration are selected for the installed control input.
Contamination on exposed optics causes unstable sensing.The smooth tinted window presents a protected, wipe-clean optical face.
Technicians cannot quickly confirm whether the sensor is switching.A dedicated green indicator displays local detection status during testing.
Aplicaciones típicas
Personnel air shower occupancy detectionMaterial air shower entry sensingAutomatic shower-cycle triggeringCleanroom door-sequence control
Parámetros técnicos
Typical construction and dimensional ranges for compact air shower photoelectric sensors are shown below.
| Materiales Core | Polycarbonate sensor housing with infrared emitter, receiver and electronic switching circuit |
|---|---|
| Panel de espesor | 25-60 mm nominal sensor housing depth |
| Ancho efectivo | 45-90 mm nominal body width excluding mounting ears |
| Longitud máxima | Up to 150 mm overall height including connector |
| Acero frente a espesor | 1.0-2.0 mm stainless-steel mounting-ear thickness |
| Densidad Core | 1180-1220 kg/m³ for polycarbonate housing material |
| Conductividad térmica | 0.19-0.22 W/(m·K) for polycarbonate housing material |
| Superficie acabada | Matte black housing with dark-red optical window and green status indicator |
| Tipo conjunto | Sealed two-piece housing with twin mounting ears and threaded cable connector |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Matched supply voltagePNP or NPN switching outputAdjustable detection distanceAlternative cable and connector lengths
Planning a Air Shower Infrared Sensor specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
